Use of steel converter slag as nickel adsorber to wastewater treatment

作者: N. Ortiz , M.A.F. Pires , J.C. Bressiani

DOI: 10.1016/S0956-053X(00)00123-9

关键词:

摘要: Magnetite, the main component of converter slag in steel industry, can be used for adsorption Ni(II) from aqueous solutions, over a range conditions: initial metal concentration (10-100 mg 1(-1)), stirring times (2-240 min), adsorbent dosage (1 g 0.5 1 solution) and temperatures (20, 30 38 degrees C). The rate increased with but decreased increase temperature, due to competition dissolution process. process obeyed Freundlich isotherm model.

参考文章(10)
S. Musić, M. Ristic, Adsorption of zinc(II) on hydrous iron oxides Journal of Radioanalytical and Nuclear Chemistry. ,vol. 162, pp. 351- 362 ,(1992) , 10.1007/BF02035395
Konduru R. Ramakrishna, T. Viraraghavan, USE OF SLAG FOR DYE REMOVAL Waste Management. ,vol. 17, pp. 483- 488 ,(1998) , 10.1016/S0956-053X(97)10058-7
Matthew L. Pierce, Carleton B. Moore, Adsorption of arsenite and arsenate on amorphous iron hydroxide Water Research. ,vol. 16, pp. 1247- 1253 ,(1982) , 10.1016/0043-1354(82)90143-9
Gordon Mckay, MS Otterburn, AG Sweeney, The removal of colour from effluent using various adsorbents—III. Silica: Rate processes Water Research. ,vol. 14, pp. 15- 20 ,(1980) , 10.1016/0043-1354(80)90037-8
Mark M Benjamin, James O Leckie, MULTIPLE-SITE ADSORPTION OF CD, CU, ZN, AND PB ON AMORPHOUS IRON OXYHYDROXIDE Journal of Colloid and Interface Science. ,vol. 79, pp. 209- 221 ,(1981) , 10.1016/0021-9797(81)90063-1
G. McKay, H. S. Blair, J. R. Gardner, Adsorption of dyes on chitin. I. Equilibrium studies Journal of Applied Polymer Science. ,vol. 27, pp. 3043- 3057 ,(1982) , 10.1002/APP.1982.070270827