Flexural and impact properties of flax woven, knitted and sequentially stacked knitted/woven preform reinforced epoxy composites:
作者： BA Muralidhar , VR Giridev , K Raghunathan
关键词:
摘要: In this article, plain woven, rib knitted and sequentially stacked knitted/plain flax fabric reinforced epoxy composites are investigated for their flexural impact properties. The effect of lay-up angle the number preform layers on above-mentioned properties also studied. composite laminates were processed by hand technique using 2 4 mm thick spacers cured under pressure 3 bar 2 h at 50°C, followed curing in an oven 120°C 1 h. Specimen preparation testing carried out as per ASTM standards. results indicate that woven perform better both all angles thicknesses study. Among knitted/woven laminates, specimen with skin exhibited data obtained show a tendency lower values increase n...
sagepub.com
harvard.edu
sci-hub.se 参考文章(19)
MJA Van den Oever, HL Bos, MJJM Van Kemenade, Influence of the physical structure of flax fibres on the mechanical properties of flax fibre reinforced polypropylene composites Applied Composite Materials. ,vol. 7, pp. 387- 402 ,(2000) , 10.1023/A:1026594324947
S. Savci, J.I. Curiskis, M.T. Pailthorpe, A study of the deformation of weft-knit preforms for advanced composite structures Part 2: The resultant composite Composites Science and Technology. ,vol. 60, pp. 1943- 1951 ,(2000) , 10.1016/S0266-3538(00)00078-6
A.D. Kelkar, J.S. Tate, R. Bolick, Structural integrity of aerospace textile composites under fatigue loading Materials Science and Engineering B-advanced Functional Solid-state Materials. ,vol. 132, pp. 79- 84 ,(2006) , 10.1016/J.MSEB.2006.02.033
Muhammad Pervaiz, Mohini M Sain, Carbon storage potential in natural fiber composites Resources Conservation and Recycling. ,vol. 39, pp. 325- 340 ,(2003) , 10.1016/S0921-3449(02)00173-8
G. Di Bella, V. Fiore, A. Valenza, Effect of areal weight and chemical treatment on the mechanical properties of bidirectional flax fabrics reinforced composites Materials & Design. ,vol. 31, pp. 4098- 4103 ,(2010) , 10.1016/J.MATDES.2010.04.050
Kayode Adekunle, Sung-Woo Cho, Christian Patzelt, Thomas Blomfeldt, Mikael Skrifvars, Impact and Flexural Properties of Flax Fabrics and Lyocell Fiber-Reinforced bio-based Thermoset Journal of Reinforced Plastics and Composites. ,vol. 30, pp. 685- 697 ,(2011) , 10.1177/0731684411405874
Bo Smeder, Sten Liljedahl, Market oriented identification of important properties in developing flax fibres for technical uses Industrial Crops and Products. ,vol. 5, pp. 149- 162 ,(1996) , 10.1016/0926-6690(96)00009-X
Surya D. Pandita, Didier Falconet, Ignaas Verpoest, Impact properties of weft knitted fabric reinforced composites Composites Science and Technology. ,vol. 62, pp. 1113- 1123 ,(2002) , 10.1016/S0266-3538(02)00057-X
C. Santulli, M. Janssen, G. Jeronimidis, Partial replacement of E-glass fibers with flax fibers in composites and effect on falling weight impact performance Journal of Materials Science. ,vol. 40, pp. 3581- 3585 ,(2005) , 10.1007/S10853-005-2882-Y
P.A. Smith, K.J. Pascoe, The effect of stacking sequence on the bearing strengths of quasi-isotropic composite laminates Composite Structures. ,vol. 6, pp. 1- 20 ,(1986) , 10.1016/0263-8223(86)90065-6