Assessment of the possibility of the application of a CrN+OX multi-layer coating to mitigate the development of fretting wear in a press-fit joint
作者： Sławomir Kowalski
DOI: 10.1016/J.WEAR.2017.11.018
关键词:
摘要: … A press-fit joint is one of the most often used methods of machine parts assembly because of … wear may occur in a press-fit joint consequently leading to the decomposition of the joint. …
sci-hub.se 参考文章(27)
D. Cressman, B. Tury, G.L. Doll, Effects of surface treatments and coatings on tribological performance of Ti–6Al–4V in the mixed fretting and gross slip regimes Surface & Coatings Technology. ,vol. 276, pp. 110- 115 ,(2016) , 10.1016/J.SURFCOAT.2015.06.055
Fei Shen, Weiping Hu, George Z. Voyiadjis, Qingchun Meng, Effects of fatigue damage and wear on fretting fatigue under partial slip condition Wear. pp. 394- 405 ,(2015) , 10.1016/J.WEAR.2015.07.012
G. Pagnoux, S. Fouvry, M. Peigney, B. Delattre, G. Mermaz-Rollet, Influence of scratches on the wear behavior of DLC coatings Wear. ,vol. 330, pp. 380- 389 ,(2015) , 10.1016/J.WEAR.2014.12.010
V. Périer, L. Dieng, L. Gaillet, S. Fouvry, Influence of an aqueous environment on the fretting behaviour of steel wires used in civil engineering cables Wear. ,vol. 271, pp. 1585- 1593 ,(2011) , 10.1016/J.WEAR.2011.01.095
Satendra Kumar, T.S.N. Sankara Narayanan, S. Ganesh Sundara Raman, S.K. Seshadri, Evaluation of fretting corrosion behaviour of CP-Ti for orthopaedic implant applications Tribology International. ,vol. 43, pp. 1245- 1252 ,(2010) , 10.1016/J.TRIBOINT.2009.12.007
S.R. Pearson, P.H. Shipway, Is the wear coefficient dependent upon slip amplitude in fretting? Vingsbo and Söderberg revisited Wear. ,vol. 330, pp. 93- 102 ,(2015) , 10.1016/J.WEAR.2014.11.005
Linda Aissani, Corinne Nouveau, M Jade Walock, Hamid Djebaili, AJSE Djelloul, None, Influence of vanadium on structure, mechanical and tribological properties of CrN coatings Surface Engineering. ,vol. 31, pp. 779- 788 ,(2015) , 10.1179/1743294415Y.0000000043
S. B Leen, T. H Hyde, C. H. H Ratsimba, E. J Williams, I. R McColl, An investigation of the fatigue and fretting performance of a representative aero-engine spline coupling Journal of Strain Analysis for Engineering Design. ,vol. 37, pp. 565- 583 ,(2002) , 10.1243/030932402320950161
M. Sujata, M. Madan, K. Raghavendra, S.K. Bhaumik, Fretting Fatigue in Aircraft Components Made of Ti-Al-V Alloys Procedia Engineering. ,vol. 55, pp. 481- 486 ,(2013) , 10.1016/J.PROENG.2013.03.284
M. Durmaz, B. Kilinc, E. Abakay, U. Sen, S. Sen, Tribological properties of CrN coatings deposited by nitro-chromizing treatment on AISI D2 steel 4TH INTERNATIONAL CONGRESS IN ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE (APMAS 2014). ,vol. 1653, pp. 020034- ,(2015) , 10.1063/1.4914225