Thermoplastic elastomeric blends of poly(ethylene terephthalate) and acrylate rubber: 1. Influence of interaction on thermal, dynamic mechanical and tensile properties
作者： Abhijit Jha , Anil K. Bhowmick
DOI: 10.1016/S0032-3861(96)01028-2
关键词:
摘要: Poly(ethylene terephthalate) (PET) and acrylate rubber (ACM) were solution blended in nitrobenzene, a common solvent, at 160°C. The blend film (50/50 weight ratio) was heated 300°C for different times to induce trans-esterification reaction between the two components extent of characterized by i.r. spectroscopy. effects on thermal, dynamic mechanical tensile properties blends studied. results confirm possibility trans-reaction PET ACM up 45 min, after which degradation phases is predominant. Better support situ compatibilization via trans-reaction, increases adhesion interface.
elsevier.com
sci-hub.se 参考文章(14)
Anil K. Bhowmick, Howard L. Stephens, Handbook of elastomers : new developments and technology M. Dekker. ,(1988)
N. R. Legge, Johannes H. Schroeder, G. Holden, Thermoplastic elastomers : a comprehensive review Hanser Publishers , Distributed in the U.S.A. by Macmillan. ,(1987)
Namita Roy Choudhury, Anil K. Bhowmick, Studies on Adhesion Between Natural Rubber and Polyethylene and the Role of Adhesion Promoters Journal of Adhesion. ,vol. 32, pp. 1- 14 ,(1990) , 10.1080/00218469008030176
A. J. Müller, J. L. Feijoo, M. E. Alvarez, A. C. Febles, The Calorimetric and Mechanical Properties of Virgin and Recycled Poly( Ethylene Terephthalate) From Beverage Bottles Polymer Engineering and Science. ,vol. 27, pp. 796- 803 ,(1987) , 10.1002/PEN.760271105
S. Kole, S. Roy, Anil K. Bhowmick, Interaction between silicone and EPDM rubbers through functionalization and its effect on properties of the blend Polymer. ,vol. 35, pp. 3423- 3426 ,(1994) , 10.1016/0032-3861(94)90904-0
Namita Roy Choudhury, Anil K. Bhowmick, Compatibilization of natural rubber–polyolefin thermoplastic elastomeric blends by phase modification Journal of Applied Polymer Science. ,vol. 38, pp. 1091- 1109 ,(1989) , 10.1002/APP.1989.070380609
V. M. Nadkarni, J. P. Jog, Interrelationship between the crystallization behavior, injection molding conditions, and morphology of poly(ethylene terephthalate)/poly(methyl methacrylate) alloys Polymer Engineering and Science. ,vol. 27, pp. 451- 457 ,(1987) , 10.1002/PEN.760270610
S.R. Padibjo, I.M. Ward, A structural study of the tensile drawing behaviour of poly(ethylene terephthalate) Polymer. ,vol. 24, pp. 1103- 1112 ,(1983) , 10.1016/0032-3861(83)90243-4
Roger S. Porter, Li-Hui Wang, Compatibility and transesterification in binary polymer blends Polymer. ,vol. 33, pp. 2019- 2030 ,(1992) , 10.1016/0032-3861(92)90866-U
Kostas G Gravalos, Joannis K Kallitsis, Nikos K Kalfoglou, None, In situ compatibilization of poly(ethylene terephthalate)/poly(ethylene-co-ethyl acrylate) blends Polymer. ,vol. 36, pp. 1393- 1399 ,(1995) , 10.1016/0032-3861(95)95916-O