Fabrication and characterization of Ti6Al4V/TiB 2 –TiC composites by powder metallurgy method
作者： M. Anandajothi , S. Ramanathan , V. Ananthi , P. Narayanasamy
DOI: 10.1007/S12598-016-0732-5
关键词:
摘要: Titanium matrix (Ti6Al4V) composites reinforced with TiB2 and TiC were produced through powder metallurgy method. The effect of addition both different contents (2.5 wt%, 5.0 wt% 7.5 wt%) on the density, microstructure hardness properties titanium was investigated. size distributions alloy reinforcement particles measured by particle analyzer. Microhardness sintered evaluated using Vickers’s tester a normal load 3 N dwell time 10 s. Ti6Al4V Ti6Al4V/TiB2–TiC characterized X-ray diffraction (XRD) field emission scanning electron microscope (FESEM) equipped energy-dispersive spectrometer (EDS). enriches alloy. composite features dense pore-free varying distribution in metal matrix. results this study show that development new phases plays significant role these materials.
springer.com
sci-hub.se 参考文章(24)
Hui-Ping Shao, Zhi Wang, Tao Lin, Qing Ye, Zhi-Meng Guo, Preparation of TiAl alloy powder by high-energy ball milling and diffusion reaction at low temperature Rare Metals. ,vol. 37, pp. 21- 25 ,(2018) , 10.1007/S12598-015-0466-9
Y.F. Yang, Q.C. Jiang, Effect of TiB2/TiC ratio on the microstructure and mechanical properties of high volume fractions of TiB2/TiC reinforced Fe matrix composite International Journal of Refractory Metals & Hard Materials. ,vol. 38, pp. 137- 139 ,(2013) , 10.1016/J.IJRMHM.2012.12.004
Mina Saeedi Heydari, Hamid Reza Baharvandi, Comparing the effects of different sintering methods for ceramics on the physical and mechanical properties of B4C–TiB2 nanocomposites International Journal of Refractory Metals & Hard Materials. ,vol. 51, pp. 224- 232 ,(2015) , 10.1016/J.IJRMHM.2015.04.003
Rui-Hua Hu, Jae-Kyoo Lim, Hardness and wear resistance improvement of surface composite layer on Ti–6Al–4V substrate fabricated by powder sintering Materials & Design. ,vol. 31, pp. 2670- 2675 ,(2010) , 10.1016/J.MATDES.2009.11.057
Tomohiro Yokozeki, Naoki Kotsuka, Keisuke Yoshida, Kouta Fujiwara, Toyohiro Sato, None, Damage characterization and numerical modeling of titanium matrix composites subjected to low-velocity impact for landing gear application Advanced Composite Materials. ,vol. 24, pp. 343- 358 ,(2015) , 10.1080/09243046.2014.912412
Kee Do Woo, Hyun Bom Lee, Fabrication of Al alloy matrix composite reinforced with subsive-sized Al2O3 particles by the in situ displacement reaction using high-energy ball-milled powder Materials Science and Engineering: A. ,vol. 449-451, pp. 829- 832 ,(2007) , 10.1016/J.MSEA.2006.02.402
D. Galvan, V. Ocelík, Y. Pei, B.J. Kooi, Jeff TH.M. De Hosson, E. Ramous, Microstructure and Properties of TiB/Ti-6Al-4V Coatings Produced With Laser Treatments Journal of Materials Engineering and Performance. ,vol. 13, pp. 406- 412 ,(2004) , 10.1361/10599490419919
M. Chmielewski, S. Nosewicz, K. Pietrzak, J. Rojek, A. Strojny-Nędza, S. Mackiewicz, J. Dutkiewicz, Sintering Behavior and Mechanical Properties of NiAl, Al2O3, and NiAl-Al2O3 Composites Journal of Materials Engineering and Performance. ,vol. 23, pp. 3875- 3886 ,(2014) , 10.1007/S11665-014-1189-Z
Li-Zhu Liu, Guo-Bing Ying, Jia Zhu, Hong Lin, Chun-Cheng Zhu, High-temperature compressive properties of TiC–TiB2/Cu composites prepared by self-propagating high-temperature synthesis Rare Metals. ,vol. 33, pp. 95- 98 ,(2014) , 10.1007/S12598-013-0077-2
Heeman Choe, Susan Abkowitz, Stanley M. Abkowitz, Influence of Processing on the Mechanical Properties of Ti-6Al-4V-Based Composites Reinforced with 7.5 mass% TiC and 7.5 mass% W Materials Transactions. ,vol. 49, pp. 2153- 2158 ,(2008) , 10.2320/MATERTRANS.MER2008049