Operational strategies for energy efficiency improvement of CNC machining
作者： Congbo Li , Lingling Li , Ying Tang , Qian Yi , Yantao Zhu
DOI: 10.1109/COASE.2016.7743553
关键词:
摘要: This paper analyzes the energy consumption characteristics of CNC machining process and exploits critical factors for efficiency improvement through a theoretical analysis, based on which series operation strategies are presented to enhance machining. A set experiments carried out demonstrate performance proposed operational strategies.
sci-hub.se 参考文章(19)
Nancy Diaz, Elena Redelsheimer, David Dornfeld, Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use Glocalized Solutions for Sustainability in Manufacturing. pp. 263- 267 ,(2011) , 10.1007/978-3-642-19692-8_46
Vincent Aizebeoje Balogun, Ampara Aramcharoen, Paul Tarisai Mativenga, Shaw Kah Chuan, Impact of Machine Tools on the Direct Energy and Associated Carbon Emissions for a Standardized NC Toolpath In: Impact of Machine Tools on the Direct Energy and Associated Carbon Emissions for a Standardized NC Toolpath: 20th CIRP International Conference on Life Cycle Engineering (LCE), Singapore; 17 Apr 2013; 2013.. pp. 197- 202 ,(2013) , 10.1007/978-981-4451-48-2_32
Sushrut Pavanaskar, Sushrut Pande, Youngwook Kwon, Zhongyin Hu, Alla Sheffer, Sara McMains, Energy-efficient vector field based toolpaths for CNC pocketmachining Journal of Manufacturing Processes. ,vol. 20, pp. 314- 320 ,(2015) , 10.1016/J.JMAPRO.2015.06.009
Hae-Sung Yoon, Eun-Seob Kim, Min-Soo Kim, Jang-Yeob Lee, Gyu-Bong Lee, Sung-Hoon Ahn, None, Towards greener machine tools – A review on energy saving strategies and technologies Renewable & Sustainable Energy Reviews. ,vol. 48, pp. 870- 891 ,(2015) , 10.1016/J.RSER.2015.03.100
Gianni Campatelli, Lorenzo Lorenzini, Antonio Scippa, Optimization of process parameters using a Response Surface Method for minimizing power consumption in the milling of carbon steel Journal of Cleaner Production. ,vol. 66, pp. 309- 316 ,(2014) , 10.1016/J.JCLEPRO.2013.10.025
Thomas Behrendt, André Zein, Sangkee Min, Development of an energy consumption monitoring procedure for machine tools CIRP Annals. ,vol. 61, pp. 43- 46 ,(2012) , 10.1016/J.CIRP.2012.03.103
U. Götze, H.-J. Koriath, A. Kolesnikov, R. Lindner, J. Paetzold, Integrated methodology for the evaluation of the energy- and cost-effectiveness of machine tools Cirp Journal of Manufacturing Science and Technology. ,vol. 5, pp. 151- 163 ,(2012) , 10.1016/J.CIRPJ.2012.04.001
Rajesh Kumar Bhushan, Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites Journal of Cleaner Production. ,vol. 39, pp. 242- 254 ,(2013) , 10.1016/J.JCLEPRO.2012.08.008
Shaohua Hu, Fei Liu, Yan He, Tong Hu, An on-line approach for energy efficiency monitoring of machine tools Journal of Cleaner Production. ,vol. 27, pp. 133- 140 ,(2012) , 10.1016/J.JCLEPRO.2012.01.013
Issam Hanafi, Abdellatif Khamlichi, Francisco Mata Cabrera, Emiliano Almansa, Abdallah Jabbouri, Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools Journal of Cleaner Production. ,vol. 33, pp. 1- 9 ,(2012) , 10.1016/J.JCLEPRO.2012.05.005