Oxidation behavior of C/SiC-Ti3SiC2 at 800–1300 °C in air
作者： Xiaomeng Fan , Xiaowei Yin , Yuzhao Ma , Litong Zhang , Laifei Cheng
DOI: 10.1016/J.JEURCERAMSOC.2016.03.029
关键词:
摘要: Abstract In this work, the oxidation behavior of C/SiC-Ti3SiC2 from 800 to 1300 °C has been studied compared with that C/SiC. shows severe weight loss and low flexural strength after 10 h at 800 °C. With temperature increasing 1000 °C, coating cracks can be healed by silica matrix product Ti3SiC2, so retention ratios reach above 90% 1000 1200 °C, revealing better resistance than C/SiC range 1200 °C. 1300 °C, decreases due outer carbon fibers.
sci-hub.se 参考文章(31)
Yang Mu, Wancheng Zhou, Feng Wan, Donghai Ding, Yang Hu, Fa Luo, High-temperature dielectric and electromagnetic interference shielding properties of SiCf/SiC composites using Ti3SiC2 as inert filler Composites Part A-applied Science and Manufacturing. ,vol. 77, pp. 195- 203 ,(2015) , 10.1016/J.COMPOSITESA.2015.07.004
Michel W. Barsoum, Tamer El‐Raghy, Linus U. J. T. Ogbuji, Oxidation of Ti3SiC2 in air Journal of The Electrochemical Society. ,vol. 144, pp. 2508- 2516 ,(1997) , 10.1149/1.1837846
Xiaomeng Fan, Xiaowei Yin, Microstructure and Properties of Carbon Fiber Reinforced SiC Matrix Composites Containing Ti3SiC2 Advanced Engineering Materials. ,vol. 16, pp. 670- 683 ,(2014) , 10.1002/ADEM.201400081
Jinshan Yang, Shaoming Dong, Chengying Xu, Mechanical response and microstructure of 2D carbon fiber reinforced ceramic matrix composites with SiC and Ti3SiC2 fillers Ceramics International. ,vol. 42, pp. 3019- 3027 ,(2016) , 10.1016/J.CERAMINT.2015.10.088
Charles B Spencer, Jose M Córdoba, Nicholas H Obando, Miladin Radovic, Magnus Odén, Lars Hultman, Michel W Barsoum, None, The Reactivity of Ti2AlC and Ti3SiC2 with SiC Fibers and Powders up to Temperatures of 1550°C Journal of the American Ceramic Society. ,vol. 94, pp. 1737- 1743 ,(2011) , 10.1111/J.1551-2916.2010.04332.X
Fengming Shi, Xiaowei Yin, Xiaomeng Fan, Laifei Cheng, Litong Zhang, A new route to fabricate SiB4 modified C/SiC composites Journal of the European Ceramic Society. ,vol. 30, pp. 1955- 1962 ,(2010) , 10.1016/J.JEURCERAMSOC.2010.02.028
Michel W. Barsoum, The MN+1AXN phases: A new class of solids Progress in Solid State Chemistry. ,vol. 28, pp. 201- 281 ,(2000) , 10.1016/S0079-6786(00)00006-6
Zhimei Sun, Yanchun Zhou, Meishuan Li, Oxidation behaviour of Ti3SiC2-based ceramic at 900–1300°C in air Corrosion Science. ,vol. 43, pp. 1095- 1109 ,(2001) , 10.1016/S0010-938X(00)00142-6
Sufang Tang, Jingyi Deng, Shijun Wang, Wenchuan Liu, Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2–SiC composites Corrosion Science. ,vol. 51, pp. 54- 61 ,(2009) , 10.1016/J.CORSCI.2008.09.037
G.M. Song, Y.T. Pei, W.G. Sloof, S.B. Li, J.Th.M. De Hosson, S. van der Zwaag, Oxidation-induced crack healing in Ti3AlC2 ceramics Scripta Materialia. ,vol. 58, pp. 13- 16 ,(2008) , 10.1016/J.SCRIPTAMAT.2007.09.006