Mixing performance comparison of milliscale continuous high‐shear mixers
作者： Jussi Tamminen , Tuomas Koiranen
DOI: 10.1002/CJCE.22327
关键词:
摘要: Mixing performance of two continuous flow millilitre-scale reactors (volumes 9.5 mL and 2.5 mL) equipped with rotor-stator mixers was studied. Cumulative residence time distributions (RTD) were determined experimentally using a step response method. Distributions measured for both by varying impeller speed feed rate. The mixing effect RTDs. Computational fluid dynamics (CFD) used to verify that the distribution in measurement outlet agreed flow. power calorimetric reactor inlet rate found affect at 1–13 s times but could not be noted. Both milliscale are close an ideal stirred-tank (CSTR) studied ranges. specific interfacial area depend on constant case copper solvent extraction.
sci-hub.se 参考文章(21)
T. Sparks, Fluid mixing in rotor/stator mixers Cranfield University. ,(1996)
Andrzej W. Pacek, Steven Hall, Michael Cooke, Adam J. Kowalski, Emulsification in Rotor–Stator Mixers Emulsion Formation and Stability. pp. 127- 167 ,(2013) , 10.1002/9783527647941.CH5
Jinli Zhang, Shuangqing Xu, Wei Li, High shear mixers: A review of typical applications and studies on power draw, flow pattern, energy dissipation and transfer properties Chemical Engineering and Processing: Process Intensification. ,vol. 57-58, pp. 25- 41 ,(2012) , 10.1016/J.CEP.2012.04.004
Fabien Barailler, Mourad Heniche, Philippe A. Tanguy, CFD analysis of a rotor-stator mixer with viscous fluids Chemical Engineering Science. ,vol. 61, pp. 2888- 2894 ,(2006) , 10.1016/J.CES.2005.10.064
Ciyou Zhu, Richard H. Byrd, Peihuang Lu, Jorge Nocedal, Algorithm 778: L-BFGS-B: Fortran subroutines for large-scale bound-constrained optimization ACM Transactions on Mathematical Software. ,vol. 23, pp. 550- 560 ,(1997) , 10.1145/279232.279236
T.L. Rodgers, M. Cooke, Rotor-Stator Devices: The Role of Shear and the Stator Chemical Engineering Research & Design. ,vol. 90, pp. 323- 327 ,(2012) , 10.1016/J.CHERD.2011.07.018
Shuangqing Xu, Jintao Shi, Qin Cheng, Wei Li, Jinli Zhang, Residence time distributions of in-line high shear mixers with ultrafine teeth Chemical Engineering Science. ,vol. 87, pp. 111- 121 ,(2013) , 10.1016/J.CES.2012.10.017
Jussi Tamminen, Tuomo Sainio, Erkki Paatero, Intensification of metal extraction with high-shear mixing Chemical Engineering and Processing. ,vol. 73, pp. 119- 128 ,(2013) , 10.1016/J.CEP.2013.08.005
A. Utomo, M. Baker, A.W. Pacek, The effect of stator geometry on the flow pattern and energy dissipation rate in a rotor-stator mixer Chemical Engineering Research & Design. ,vol. 87, pp. 533- 542 ,(2009) , 10.1016/J.CHERD.2008.12.011
Adi T. Utomo, Michael Baker, Andrzej W. Pacek, Flow pattern, periodicity and energy dissipation in a batch rotor–stator mixer Chemical Engineering Research & Design. ,vol. 86, pp. 1397- 1409 ,(2008) , 10.1016/J.CHERD.2008.07.012