Fire-resistance, physical, and mechanical characterization of particleboard containing Oceanic Posidonia waste
作者： J. M. Saval , R. Lapuente , V. Navarro , A. J. Tenza-Abril
关键词:
摘要: In this work, particleboards manufactured with Oceanic Posidonia waste and bonded cement are investigated. The made 3/1.5/0.5 parts of per part waste. physical properties bulk density, swelling, surface absorption, dimensional changes due to relative humidity as well the mechanical modulus elasticity, bending strength, soundness, perpendicular tensile strength impact resistance studied. terms above properties, best results were obtained for high content when “leaves” treated (crushed) before board fabrication, internal structure under these conditions. Based on fire tests, particleboard is non-flammable without any fire-resistant treatment.
unirioja.es
core.ac.uk
sci-hub.st 参考文章(16)
César García-Andreu, José Miguel Saval Pérez, S. Chinchón, Análisis de las características físicas y mecánicas de morteros de cemento con adición de cenizas de Posidonia oceánica Ingeniería civil. pp. 89- 102 ,(2008)
César García-Andreu, José Miguel Saval Pérez, Moisés Frías Rojas, José Servando Chinchón Yepes, Caracterización de las cenizas de Posidonia oceánica para su utilización como material de construcción Ingeniería civil. pp. 131- 140 ,(2008)
Myron W. Kelly, Critical Literature Review of Relationships Between Processing Parameters and Physical Properties of Particleboard. Gen. Tech. Rep. FPL-10. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 65 p.. ,vol. 010, ,(1977)
Cengiz Güler, Yalçın Çöpür, U Büyuksan, None, Producing particleboards from hazelnut (Corylus avellana L.) husk and European Black Pine (Pinus nigra Arnold). Wood Research. ,vol. 54, pp. 125- 132 ,(2009)
Raúl Espinoza-Herrera, Alain Cloutier, Physical and mechanical properties of gypsum particleboard reinforced with Portland cement European Journal of Wood and Wood Products. ,vol. 69, pp. 247- 254 ,(2011) , 10.1007/S00107-010-0434-X
A. Sampathrajan, N.C. Vijayaraghavan, K.R. Swaminathan, Mechanical and thermal properties of particle boards made from farm residues Bioresource Technology. ,vol. 40, pp. 249- 251 ,(1992) , 10.1016/0960-8524(92)90151-M
Gökay Nemli, Hüseyin Kırcı, Bedri Serdar, Nurgül Ay, Suitability of kiwi (Actinidia sinensis Planch.) prunings for particleboard manufacturing Industrial Crops and Products. ,vol. 17, pp. 39- 46 ,(2003) , 10.1016/S0926-6690(02)00057-2
Mustafa Kemal Yalinkilic, Yuji Imamura, Munezoh Takahashi, Hulya Kalaycioglu, Gokay Nemli, Zafer Demirci, Turgay Ozdemir, Biological, physical and mechanical properties of particleboard manufactured from waste tea leaves International Biodeterioration & Biodegradation. ,vol. 41, pp. 75- 84 ,(1998) , 10.1016/S0964-8305(98)80010-3
Donghai Wang, Xiuzhi S Sun, Low density particleboard from wheat straw and corn pith Industrial Crops and Products. ,vol. 15, pp. 43- 50 ,(2002) , 10.1016/S0926-6690(01)00094-2
Ergun Guntekin, Birol Uner, H. Turgut Sah, Beyhan Karakus, Pepper Stalks (Capsicum annuum) as Raw Material for Particleboard Manufacturing Journal of Applied Sciences. ,vol. 8, pp. 2333- 2336 ,(2008) , 10.3923/JAS.2008.2333.2336