Fabrication of metallic composite foam using ceramic porous spheres “Light Expanded Clay Aggregate” via casting process
作者： Soheila Bazzaz Bonabi , Jalal Kahani Khabushan , Rahman Kahani , Abbas Honarbakhsh Raouf
DOI: 10.1016/J.MATDES.2014.07.061
关键词:
摘要: Abstract Composite metal foam was produced as an advanced porous material, using gravity casting technique. Light Expanded Clay Aggregate “LECA” used space holder for the composite foam. The LECA density 0.33–0.43 g/cm 3 and volume fraction of its porosity from 73 to 88 vol.% aluminum A355.0 selected matrix in order produce Structural characterization, relative density, hardness compressive test were studied. well investigated found have homogeneous structure, relatively equal pore, distributable pore isotropy properties. study resulted that yield strength energy absorption capacity 0.44, 35.9 MPa 18 MJ/m , respectively.
elsevier.com
sci-hub.se 参考文章(37)
Sosnick Benjamin, Process for making foamlike mass of metal ,(1943)
M. Tuncan, O. Arioz, S. Kivrak, G. Arslan, M. Korkut, G. Kaya, B. Karasu, A. Tuncan, A Preliminary Research On The Properties of Lightweight Expanded Clay Aggregate ,(2008)
Lorna J. Gibson, Michael F. Ashby, Cellular Solids: Structure and Properties ,(1988)
P.K. Rohatgi, J.K. Kim, N. Gupta, Simon Alaraj, A. Daoud, Compressive characteristics of A356/fly ash cenosphere composites synthesized by pressure infiltration technique Composites Part A-applied Science and Manufacturing. ,vol. 37, pp. 430- 437 ,(2006) , 10.1016/J.COMPOSITESA.2005.05.047
B. Jiang, N.Q. Zhao, C.S. Shi, X.W. Du, J.J Li, H.C Man, A novel method for making open cell aluminum foams by powder sintering process Materials Letters. ,vol. 59, pp. 3333- 3336 ,(2005) , 10.1016/J.MATLET.2005.05.068
A Ozguven, L Gunduz, None, Examination of effective parameters for the production of expanded clay aggregate Cement & Concrete Composites. ,vol. 34, pp. 781- 787 ,(2012) , 10.1016/J.CEMCONCOMP.2012.02.007
V.K. Jeenager, V. Pancholi, Influence of cell wall microstructure on the energy absorption capability of aluminium foam Materials & Design. ,vol. 56, pp. 454- 459 ,(2014) , 10.1016/J.MATDES.2013.08.109
B.P. Neville, A. Rabiei, Composite metal foams processed through powder metallurgy Materials & Design. ,vol. 29, pp. 388- 396 ,(2008) , 10.1016/J.MATDES.2007.01.026
John Banhart, Manufacture, characterisation and application of cellular metals and metal foams Progress in Materials Science. ,vol. 46, pp. 559- 632 ,(2001) , 10.1016/S0079-6425(00)00002-5
Mostafa Alizadeh, Morteza Mirzaei-Aliabadi, Compressive properties and energy absorption behavior of Al–Al2O3 composite foam synthesized by space-holder technique Materials & Design. ,vol. 35, pp. 419- 424 ,(2012) , 10.1016/J.MATDES.2011.09.059