Effect of furfural-derived thermoset furan resin on the high-temperature performance of bitumen
作者： Murat Bostancioğlu , Şeref Oruç
DOI: 10.1080/14680629.2014.990048
关键词:
摘要: Furfural is an important derivate of hemicelluloses and used in the production furan-based non-petroleum chemicals. Thermoset resins obtained from furfural exhibit extreme physical strength. Furan a furfural-derived thermoset resin. Previous work about usage furan resin (FR) as bitumen modifier reported that FR modification increases consistency ageing resistance decreases temperature moisture susceptibility. The aim this study to examine high-temperature performance FR-modified bitumen. Dynamic shear rheometer rotational viscometer tests were carried out on modified samples. Results show stiffness elasticity develops rutting resistance. maximum where binder provides required Superpave grading system was raised 64°C 76°C.
cumhuriyet.edu.tr
sci-hub.se 参考文章(28)
Zhouyang Xiang, Troy Runge, Co-production of feed and furfural from dried distillers’ grains to improve corn ethanol profitability Industrial Crops and Products. ,vol. 55, pp. 207- 216 ,(2014) , 10.1016/J.INDCROP.2014.02.025
Burak Sengoz, Ali Topal, None, Use of asphalt roofing shingle waste in HMA Construction and Building Materials. ,vol. 19, pp. 337- 346 ,(2005) , 10.1016/J.CONBUILDMAT.2004.08.005
Fereidoon Moghadas Nejad, Pedram Aghajani, Amir Modarres, Hasan Firoozifar, Investigating the properties of crumb rubber modified bitumen using classic and SHRP testing methods Construction and Building Materials. ,vol. 26, pp. 481- 489 ,(2012) , 10.1016/J.CONBUILDMAT.2011.06.048
Perviz Ahmedzade, Mehmet Yilmaz, Effect of polyester resin additive on the properties of asphalt binders and mixtures Construction and Building Materials. ,vol. 22, pp. 481- 486 ,(2008) , 10.1016/J.CONBUILDMAT.2006.11.015
Mahmoud Ameri, Ahmad Mansourian, Amir Hossein Sheikhmotevali, Investigating effects of ethylene vinyl acetate and gilsonite modifiers upon performance of base bitumen using Superpave tests methodology Construction and Building Materials. ,vol. 36, pp. 1001- 1007 ,(2012) , 10.1016/J.CONBUILDMAT.2012.04.137
Zheng Chuanfeng, Qin Yong, Lv Dan, Zhang Ting, Liu Xingyang, Zheng Shi, Effects of anti-stripping agents on the microscopic strength of mineral aggregate contact surface Construction and Building Materials. ,vol. 49, pp. 627- 634 ,(2013) , 10.1016/J.CONBUILDMAT.2013.08.070
Perviz Ahmedzade, The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen Construction and Building Materials. ,vol. 38, pp. 285- 291 ,(2013) , 10.1016/J.CONBUILDMAT.2012.07.090
Praveen Kumar, Rashi Garg, Rheology of waste plastic fibre-modified bitumen International Journal of Pavement Engineering. ,vol. 12, pp. 449- 459 ,(2011) , 10.1080/10298430903255296
Baha Vural Kök, Hakan Çolak, Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt Construction and Building Materials. ,vol. 25, pp. 3204- 3212 ,(2011) , 10.1016/J.CONBUILDMAT.2011.03.005
Yong-Rak Kim, Ingryd Pinto, Seong-Wan Park, Experimental Evaluation of Anti-stripping Additives in Bituminous Mixtures through Multiple Scale Laboratory Test Results Construction and Building Materials. ,vol. 29, pp. 386- 393 ,(2012) , 10.1016/J.CONBUILDMAT.2011.10.012