Mechanical Characterization of 3D-Printed Individualized Ti-Mesh (Membrane) for Alveolar Bone Defects.
作者： Liyun Bai , Ping Ji , Xian Li , Hui Gao , Linlin Li
DOI: 10.1155/2019/4231872
关键词:
摘要: Individualized titanium mesh holds many advantages over conventional mesh. There are few reports in the literature about effect of pore size and thickness on mechanical properties This study is designed to develop an individualized using computer-assisted design additive manufacturing technology. will also explore different thicknesses sizes its through 3D FEA. According this study, increased when decreased (0.5 mm 0.3 mm). With increase diameter (3 mm 5 mm), decreased. The has less influence than does Titanium with a 0.4 mm strong enough causes stimulation mucosa; therefore, it more suitable for clinical use. In addition, parameters should be decided clinically according bone defect size, location, force situation.
hindawi.com参考文章(30)
C. V. Haden, P. C. Collins, D. G. Harlow, Yield Strength Prediction of Titanium Alloys JOM. ,vol. 67, pp. 1357- 1361 ,(2015) , 10.1007/S11837-015-1436-2
S.A. Ribeiro Filho, C.E. Francischone, J.C. de Oliveira, L.Z. Ribeiro, F.Z.X. do Prado, B.S. Sotto-Maior, Bone augmentation of the atrophic anterior maxilla for dental implants using rhBMP-2 and titanium mesh: histological and tomographic analysis. International Journal of Oral and Maxillofacial Surgery. ,vol. 44, pp. 1492- 1498 ,(2015) , 10.1016/J.IJOM.2015.07.004
Fellippo Ramos Verri, Joel Ferreira Santiago Júnior, Daniel Augusto de Faria Almeida, Ana Caroline Gonçales Verri, Victor Eduardo de Souza Batista, Cleidiel Aparecido Araujo Lemos, Pedro Yoshito Noritomi, Eduardo Piza Pellizzer, None, Three-Dimensional Finite Element Analysis of Anterior Single Implant-Supported Prostheses with Different Bone Anchorages The Scientific World Journal. ,vol. 2015, pp. 321528- 321528 ,(2015) , 10.1155/2015/321528
Tomoki Sumida, Naruto Otawa, YU Kamata, Satoshi Kamakura, Tomiharu Mtsushita, Hisashi Kitagaki, Shigeo Mori, Kiyoyuki Sasaki, Shunsuke Fujibayashi, Mitsuru Takemoto, Atsushi Yamaguchi, Taiji Sohmura, Takashi Nakamura, Yoshihide Mori, Custom-made titanium devices as membranes for bone augmentation in implant treatment: Clinical application and the comparison with conventional titanium mesh. Journal of Cranio-maxillofacial Surgery. ,vol. 43, pp. 2183- 2188 ,(2015) , 10.1016/J.JCMS.2015.10.020
Dietmar Weng, Markus B. Hürzeler, Carlos R. Quiñones, Angela Ohlms, Raul G. Caffesse, Contribution of the periosteum to bone formation in guided bone regeneration. A study in monkeys. Clinical Oral Implants Research. ,vol. 11, pp. 546- 554 ,(2000) , 10.1034/J.1600-0501.2000.011006546.X
Goran I. Benic, Christoph H. F. Hämmerle, Horizontal bone augmentation by means of guided bone regeneration Periodontology 2000. ,vol. 66, pp. 13- 40 ,(2014) , 10.1111/PRD.12039
Soobok Her, Taeheon Kang, Matthew J. Fien, Titanium Mesh as an Alternative to a Membrane for Ridge Augmentation Journal of Oral and Maxillofacial Surgery. ,vol. 70, pp. 803- 810 ,(2012) , 10.1016/J.JOMS.2011.11.017
L. Ciocca, M. Fantini, F. De Crescenzio, G. Corinaldesi, R. Scotti, Direct metal laser sintering (DMLS) of a customized titanium mesh for prosthetically guided bone regeneration of atrophic maxillary arches. Medical & Biological Engineering & Computing. ,vol. 49, pp. 1347- 1352 ,(2011) , 10.1007/S11517-011-0813-4
Christopher J. Haggerty, Christopher T. Vogel, G. Rawleigh Fisher, Simple Bone Augmentation for Alveolar Ridge Defects Oral and Maxillofacial Surgery Clinics of North America. ,vol. 27, pp. 203- 226 ,(2015) , 10.1016/J.COMS.2015.01.011
Babak Sarrafpour, Michael Swain, Qing Li, Hans Zoellner, Tooth Eruption Results from Bone Remodelling Driven by Bite Forces Sensed by Soft Tissue Dental Follicles: A Finite Element Analysis PLoS ONE. ,vol. 8, pp. e58803- ,(2013) , 10.1371/JOURNAL.PONE.0058803