Sintering of bimodal alumina powder mixtures with a nanocrystalline component

作者: B.G Ravi , R Chaim , A Gedanken

DOI: 10.1016/S0965-9773(99)00380-3

关键词:

摘要: Packing characteristics and sintering behavior of the bimodal mixtures nanocrystalline (75 nm) conventional (1 μm) alumina powders were investigated. Green density pure compact was lower than that coarse particles. Increase in packing observed at 70% particle composition. The shrinkage determined by dilatometry. cold pressed compacts sintered within temperature range 1300°C to 1600°C. green followed rules giving rise higher packings compacts. At temperatures below 1400°C, relative kept this pattern. Above advantageous densification lost. changes versus powder composition discussed with respect phase transition

参考文章(11)
Randall M. German, Particle packing characteristics ,(1989)
Richard E. Tressler, Richard C. Bradt, Deformation of Ceramic Materials ,(1975)
M Moskovits, B.G Ravi, R Chaim, Sintering of bimodal Y2o3-stabilized zirconia powder mixtures with a nanocrystalline component Nanostructured Materials. ,vol. 11, pp. 179- 185 ,(1999) , 10.1016/S0965-9773(99)00030-6
Jingmin Zheng, William B. Carlson, James S. Reed, The packing density of binary powder mixtures Journal of The European Ceramic Society. ,vol. 15, pp. 479- 483 ,(1995) , 10.1016/0955-2219(95)00001-B
C. Legros, C. Carry, P. Bowen, H. Hofmann, Sintering of a transition alumina: effects of phase transformation, powder characteristics and thermal cycle Journal of The European Ceramic Society. ,vol. 19, pp. 1967- 1978 ,(1999) , 10.1016/S0955-2219(99)00016-3
J. P. SMITH, G. L. MESSING, Sintering of Bimodally Distributed Alumina Powders Journal of the American Ceramic Society. ,vol. 67, pp. 238- 242 ,(2006) , 10.1111/J.1151-2916.1984.TB18838.X
C. Scott Nordahl, Gary L. Messing, Transformation and Densification of Nanocrystalline θ‐Alumina during Sinter Forging Journal of the American Ceramic Society. ,vol. 79, pp. 3149- 3154 ,(1996) , 10.1111/J.1151-2916.1996.TB08089.X
WAYNE S. YOUNG, IVAN B. CUTLER, Initial Sintering with Constant Rates of Heating Journal of the American Ceramic Society. ,vol. 53, pp. 659- 663 ,(1970) , 10.1111/J.1151-2916.1970.TB12036.X
R. M. German, M. Bulger, A model for densification by sintering of bimodal particle size distributions International Journal of Powder Metallurgy. ,vol. 28, pp. 301- 311 ,(1992)
S. Taruta, Y. Itou, K. Kawashima, Koichi Kitajima, N. Takusagawa, Kiyoshi Okada, N. Ôtsuka, Effect of Additives on Packing and Sintering of Bimodal Size-Distributed Alumina Powder Mixtures Key Engineering Materials. pp. 321- 340 ,(1995) , 10.4028/WWW.SCIENTIFIC.NET/KEM.111-112.321