Strain-induced dynamic precipitation of Mg17Al12 phases in Mg–8Al alloys sheets rolled at 748 K

作者: Fei Guo , Dingfei Zhang , Xusheng Yang , Luyao Jiang , Fusheng Pan

DOI: 10.1016/J.MSEA.2015.03.112

关键词:

摘要: Abstract Strain-induced dynamic precipitation of Mg 17 Al 12 phases was observed in large strain hot rolling Mg–8Al alloys sheets. Our results show that phase precipitates recrystallization grains due to severe plastic deformation and the amount secondary particles increases with increasing strain. Two types nanoscale precipitated inside recrystallized were observed. The growth is constricted by pinning effect β phase. mechanical properties rolled sheets are largely influenced increase It shows ultimate tensile strength can be segregated into two different stages, which similar enhancement recrystallization. tendency evolution reveals strain-induced have excellent hardening behavior it considered as a promising way improving alloys.

参考文章(28)
Anthony D Rollett, Gregory S Rohrer, F John Humphreys, Recrystallization and Related Annealing Phenomena ,(1996)
Xiangsheng Xia, Qiang Chen, Zude Zhao, Minglong Ma, Xinggang Li, Kui Zhang, Microstructure, texture and mechanical properties of coarse-grained Mg–Gd–Y–Nd–Zr alloy processed by multidirectional forging Journal of Alloys and Compounds. ,vol. 623, pp. 62- 68 ,(2015) , 10.1016/J.JALLCOM.2014.10.084
SM Fatemi-Varzaneh, A Zarei-Hanzaki, JM Cabrera, None, Shear banding phenomenon during severe plastic deformation of an AZ31 magnesium alloy Journal of Alloys and Compounds. ,vol. 509, pp. 3806- 3810 ,(2011) , 10.1016/J.JALLCOM.2011.01.019
J.A. del Valle, M.T. Pérez-Prado, O.A. Ruano, Texture evolution during large-strain hot rolling of the Mg AZ61 alloy Materials Science and Engineering: A. ,vol. 355, pp. 68- 78 ,(2003) , 10.1016/S0921-5093(03)00043-1
X. Li, F. Jiao, T. Al-Samman, S. Ghosh Chowdhury, Influence of second-phase precipitates on the texture evolution of Mg–Al–Zn alloys during hot deformation Scripta Materialia. ,vol. 66, pp. 159- 162 ,(2012) , 10.1016/J.SCRIPTAMAT.2011.10.028
S.L. Semiatin, M.R. Staker, J.J. Jonas, PLASTIC INSTABILITY AND FLOW LOCALIZATION IN SHEAR AT HIGH RATES OF DEFORMATION Acta Metallurgica. ,vol. 32, pp. 1347- 1354 ,(1984) , 10.1016/0001-6160(84)90080-4
Y. Uematsu, K. Tokaji, M. Matsumoto, Effect of aging treatment on fatigue behaviour in extruded AZ61 and AZ80 magnesium alloys Materials Science and Engineering: A. ,vol. 517, pp. 138- 145 ,(2009) , 10.1016/J.MSEA.2009.03.066
S.W. Xu, K. Oh-ishi, S. Kamado, F. Uchida, T. Homma, K. Hono, High-strength extruded Mg–Al–Ca–Mn alloy Scripta Materialia. ,vol. 65, pp. 269- 272 ,(2011) , 10.1016/J.SCRIPTAMAT.2011.04.026
Zijian Yu, Yuanding Huang, Xin Qiu, Guanfu Wang, Fanzhi Meng, Norbert Hort, Jian Meng, Fabrication of a high strength Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloy by thermomechanical treatments Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 622, pp. 121- 130 ,(2015) , 10.1016/J.MSEA.2014.10.077