The influence of carbon black batches on the fracture behavior of glass fiber reinforced PA6/PA66 blends
作者： Markus Kroll , Beate Langer , Siegfried Schumacher , Wolfgang Grellmann
DOI: 10.1002/APP.31611
关键词:
摘要: The toughness behavior of 30 wt % glass fiber reinforced PA6/PA66 blends colored with different masterbatches containing carbon black (CB) was characterized by the instrumented Charpy impact test. Two CB types particle diameters as well two polymers, PE and PA6, were used to prepare masterbatches. concentration varied from 0 1.2 in compounds all materials examined dry after water absorption. significantly decreased when incorporated. Moisture conditioning led increased ductility but did not compensate for negative influence CB. Using a masterbatch polymer succeeded limiting on whereas largest diameter highest reduction toughness. By taking into account crack resistance curves, it could be shown that there is significant change propagation larger exceeds certain level; this ascribed existence complex structures at concentration. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
sci-hub.se 参考文章(26)
W. Grellmann, S. Seidler, W. Hesse, Procedure for Determining the Crack Resistance Behaviour Using the Instrumented Charpy Impact Test Springer Berlin Heidelberg. pp. 71- 86 ,(2001) , 10.1007/978-3-662-04556-5_4
P. R HORNSBY, K PREMPHET, Fracture toughness of multiphase polypropylene composites containing rubbery and particulate inclusions Journal of Materials Science. ,vol. 32, pp. 4767- 4775 ,(1997) , 10.1023/A:1018683014823
B. Langer, S. Seidler, W. Grellmann, Influence of Temperature and Moisture on Toughness Behaviour of Polyamide Springer Berlin Heidelberg. pp. 209- 228 ,(2001) , 10.1007/978-3-662-04556-5_15
D. Tomova, H.-J. Radusch, Morphology and properties of ternary polyamide 6/polyamide 66/elastomer blends Polymers for Advanced Technologies. ,vol. 14, pp. 19- 26 ,(2003) , 10.1002/PAT.263
M Mucha, J Marszałek, A Fidrych, Crystallization of isotactic polypropylene containing carbon black as a filler Polymer. ,vol. 41, pp. 4137- 4142 ,(2000) , 10.1016/S0032-3861(99)00706-5
X. F. Wan, Y. L. Wang, F. G. Zhou, Y. Z. Wan, Moisture Absorption Behavior of Carbon Fiber-Reinforced Monomer Casting Nylon Composites Journal of Reinforced Plastics and Composites. ,vol. 23, pp. 1031- 1040 ,(2004) , 10.1177/0731684404033961
M. Evstatiev, S. Fakirov, J. M. Schultz, K. Friedrich, In situ fibrillar reinforced PET/PA-6/PA-66 blend Polymer Engineering and Science. ,vol. 41, pp. 192- 204 ,(2001) , 10.1002/PEN.10721
Yulin Li, Hongzhi Liu, Ying Zhang, Guisheng Yang, Melting behavior and nonisothermal crystallization kinetics of polyamide 6/polyamide 66 molecular composites via in situ polymerization Journal of Applied Polymer Science. ,vol. 98, pp. 2172- 2177 ,(2005) , 10.1002/APP.22392
A. Vallés-Lluch, W. Camacho, A. Ribes-Greus, S. Karlsson, Influence of water on the viscoelastic behavior of recycled nylon 6,6 Journal of Applied Polymer Science. ,vol. 85, pp. 2211- 2218 ,(2002) , 10.1002/APP.10838
M. Mucha, Z. Królikowski, Application of dsc to study crystallization kinetics of polypropylene containing fillers Journal of Thermal Analysis and Calorimetry. ,vol. 74, pp. 549- 557 ,(2003) , 10.1023/B:JTAN.0000005193.66789.EA