Experimental investigation on mechanical and microstructural properties of AISI 304 to Cu joints by CO2 laser
作者： Bikash Ranjan Moharana , Sushanta Kumar Sahu , Susanta Kumar Sahoo , Ravi Bathe
DOI: 10.1016/J.JESTCH.2015.10.004
关键词: Quenching 、 Precipitation (chemistry) 、 Materials science 、 Carbide 、 Indentation hardness 、 Weld pool 、 Copper 、 Nucleation 、 Metallurgy 、 Welding
摘要: Abstract Aim of the present work is to investigate mechanical and metallurgical characteristics continuous wave CO2 laser welded dissimilar couple AISI 304 stainless steel commercially pure copper sheets in autogenous mode. Metallurgical analysis fusion zone has been done understand mixing solidification behavior. Macroscopic examination carried out observe macro-segregation pattern Cu, Fe Cr rich phases different zones, thickness HAZ was found be around 10 µm. The micro-channels formed from side weld pool describe that solidifies first provides nucleation surface for residual melt grow. These tubular may due carbide precipitation. EDS conforms well SS Cu inside pool. properties terms tensile stress up 201 MPa fracture are obtained outside zone. Microhardness measurements over have keyhole growth quenching, sequence distribution full area.
core.ac.uk
scipedia.com
cyberleninka.org参考文章(19)
Chethan Roy, Vipin V. Pavanan, G. Vishnu, P.R. Hari, M. Arivarasu, M. Manikandan, Devendranath Ramkumar, N. Arivazhagan, Characterization of Metallurgical and Mechanical Properties of Commercially Pure Copper and AISI 304 Dissimilar Weldments Procedia Materials Science. ,vol. 5, pp. 2503- 2512 ,(2014) , 10.1016/J.MSPRO.2014.07.502
A.F. Rowcliffe, S.J. Zinkle, J.F. Stubbins, D.J. Edwards, D.J. Alexander, Austenitic stainless steels and high strength copper alloys for fusion components Journal of Nuclear Materials. ,vol. 258, pp. 183- 192 ,(1998) , 10.1016/S0022-3115(98)00333-X
J. Brillo, I. Egry, Surface tension of nickel, copper, iron and their binary alloys Journal of Materials Science. ,vol. 40, pp. 2213- 2216 ,(2005) , 10.1007/S10853-005-1935-6
Ming Gao, Cong Chen, Lei Wang, Zemin Wang, Xiaoyan Zeng, Laser-Arc Hybrid Welding of Dissimilar Titanium Alloy and Stainless Steel Using Copper Wire Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 46, pp. 2007- 2020 ,(2015) , 10.1007/S11661-015-2798-3
Jun Yan, Ming Gao, Xiaoyan Zeng, Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding Optics and Lasers in Engineering. ,vol. 48, pp. 512- 517 ,(2010) , 10.1016/J.OPTLASENG.2009.08.009
A Hussain, A H Hamdani, R Akhter, CO2 laser welding of AISI 321stainless steel IOP Conference Series: Materials Science and Engineering. ,vol. 60, pp. 012042- ,(2014) , 10.1088/1757-899X/60/1/012042
Gandham Phanikumar, Sambandam Manjini, Pradip Dutta, Kamanio Chattopadhyay, Jyotirmoy Mazumder, Characterization of a continuous CO2 laser-welded Fe-Cu dissimilar couple Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 36, pp. 2137- 2147 ,(2005) , 10.1007/S11661-005-0334-6
Tetsuo Suga, Yasuoa Murai, Taizo Kobashi, Kunika Ueno, Minoru Shindo, Katsunori Kanno, Kazuhiro Nakata, Laser brazing of a dissimilar joint of austenitic stainless steel and pure copper Welding International. ,vol. 30, pp. 166- 174 ,(2016) , 10.1080/09507116.2014.921090
V. Raghavan, Cr-Cu-Fe (Chromium-Copper-Iron) Journal of Phase Equilibria. ,vol. 23, pp. 257- 258 ,(2002) , 10.1361/105497102770331758
T. Matsumoto, T. Misono, H. Fujii, K. Nogi, Surface tension of molten stainless steels under plasma conditions Journal of Materials Science. ,vol. 40, pp. 2197- 2200 ,(2005) , 10.1007/S10853-005-1932-9