CFD-supported optimization of flow distribution in quench tank for heat treatment of A357 alloy large complicated components
作者： Xia-wei YANG , Jing-chuan ZHU , Wen-ya LI
DOI: 10.1016/S1003-6326(15)63975-9
关键词: Flow (psychology) 、 Mechanical engineering 、 Work (thermodynamics) 、 Alloy 、 Engineering 、 Flow distribution 、 Computational fluid dynamics 、 Mechanics 、 Process (computing) 、 Flow velocity 、 Fluent
摘要: Abstract The flow distribution in quench tank for heat treatment of A357 alloy large complicated components was simulated using FLUENT computational fluid dynamics (CFD) software. velocity and the uniformity field two types tanks (with or without agitation system) were calculated. results show that system has not evident regularity. While as with system, fields different parameters have certain a distinct advantage over agitation. Proper process also obtained. Finally, model established this work testified by an example from publication. This high accuracy is able to optimize structures can be helpful industrial production theoretical investigation components.
sci-hub.se 参考文章(11)
Ji-hua PENG, Xiao-long TANG, Jian-ting HE, De-ying XU, Effect of heat treatment on microstructure and tensile properties of A356 alloys Transactions of Nonferrous Metals Society of China. ,vol. 21, pp. 1950- 1956 ,(2011) , 10.1016/S1003-6326(11)60955-2
Ihab Elkatatny, Y Morsi, Aaron S Blicblau, Subrat Das, ED Doyle, Numerical analysis and experimental validation of high pressure gas quenching International Journal of Thermal Sciences. ,vol. 42, pp. 417- 423 ,(2003) , 10.1016/S1290-0729(02)00042-X
Xiawei Yang, Jingchuan Zhu, Zhisheng Nong, Zhonghong Lai, Dong He, FEM simulation of quenching process in A357 aluminum alloy cylindrical bars and reduction of quench residual stress through cold stretching process Computational Materials Science. ,vol. 69, pp. 396- 413 ,(2013) , 10.1016/J.COMMATSCI.2012.11.024
O.S Es-Said, D Lee, W.D Pfost, D.L Thompson, M Patterson, J Foyos, R Marloth, Alternative heat treatments for A357-T6 aluminum alloy Engineering Failure Analysis. ,vol. 9, pp. 99- 107 ,(2002) , 10.1016/S1350-6307(00)00034-0
Xia-wei YANG, Jing-chuan ZHU, Zhi-sheng NONG, Dong HE, Zhong-hong LAI, Ying LIU, Fa-wei LIU, Prediction of mechanical properties of A357 alloy using artificial neural network Transactions of Nonferrous Metals Society of China. ,vol. 23, pp. 788- 795 ,(2013) , 10.1016/S1003-6326(13)62530-3
Xin-lei LI, Qi-tang HAO, Wan-qi JIE, Yu-chuan ZHOU, Development of pressure control system in counter gravity casting for large thin-walled A357 aluminum alloy components Transactions of Nonferrous Metals Society of China. ,vol. 18, pp. 847- 851 ,(2008) , 10.1016/S1003-6326(08)60147-8
Xia-wei YANG, Jing-chuan ZHU, Dong HE, Zhong-hong LAI, Zhi-sheng NONG, Yong LIU, Optimum design of flow distribution in quenching tank for heat treatment of A357 aluminum alloy large complicated thin-wall workpieces by CFD simulation and ANN approach Transactions of Nonferrous Metals Society of China. ,vol. 23, pp. 1442- 1451 ,(2013) , 10.1016/S1003-6326(13)62615-1
D. R. Garwood, J. D. Lucas, R. A. Wallis, J. Ward, Modeling of the flow distribution in an oil quench tank Journal of Materials Engineering and Performance. ,vol. 1, pp. 781- 787 ,(1992) , 10.1007/BF02658261
Xia-wei YANG, Jing-chuan ZHU, Zhong-hong LAI, Yong LIU, Dong HE, Zhi-sheng NONG, Finite element analysis of quenching temperature field, residual stress and distortion in A357 aluminum alloy large complicated thin-wall workpieces Transactions of Nonferrous Metals Society of China. ,vol. 23, pp. 1751- 1760 ,(2013) , 10.1016/S1003-6326(13)62657-6
Nailu Chen, Bo Liao, Jiansheng Pan, Qiang Li, Changyin Gao, Improvement of the flow rate distribution in quench tank by measurement and computer simulation Materials Letters. ,vol. 60, pp. 1659- 1664 ,(2006) , 10.1016/J.MATLET.2005.11.102