Development of intermetallic particles during solidification and homogenization of two AA 5xxx series Al-Mg alloys with different Mg contents
作者： Olaf Engler , Katrin Kuhnke , Jochen Hasenclever
DOI: 10.1016/J.JALLCOM.2017.09.060
关键词: Annealing (metallurgy) 、 Microstructure 、 Intermetallic 、 Solid solution 、 Characterization methods 、 Materials science 、 Homogenization (chemistry) 、 Metallurgy 、 Microchemistry 、 Mg alloys
摘要: … development of intermetallic particles during solidification and the microchemistry changes upon subsequent homogenization of these two Al-Mg alloys… 5083-O aluminum alloy plates for …
sci-hub.se 参考文章(37)
Sundaram Kumar, Nadendla Hari Babu, Geoff M. Scamans, Dmitry G. Eskin, Zhongyun Fan, Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content International Journal of Materials Research. ,vol. 103, pp. 1228- 1234 ,(2012) , 10.3139/146.110760
Yoshimitsu Miyagi, Mitsuo Hino, Masayuki Fujino, Hiroshi Yanai, Properties of thick 5083-0 aluminum alloy plates for the equatorial ring of a spherical LNG cargo tank Journal of Materials for Energy Systems. ,vol. 6, pp. 273- 278 ,(1985) , 10.1007/BF02833516
YJ Li, L Arnberg, None, Solidification structures and phase selection of iron-bearing eutectic particles in a DC-cast AA5182 alloy Acta Materialia. ,vol. 52, pp. 2673- 2681 ,(2004) , 10.1016/J.ACTAMAT.2004.02.015
Jacques Lacaze, Luiz Eleno, Bo Sundman, Thermodynamic Assessment of the Aluminum Corner of the Al-Fe-Mn-Si System Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 41, pp. 2208- 2215 ,(2010) , 10.1007/S11661-010-0263-X
YJ Li, L Arnberg, None, A eutectoid phase transformation for the primary intermetallic particle from Alm(Fe,Mn) to Al3(Fe,Mn) in AA5182 alloy Acta Materialia. ,vol. 52, pp. 2945- 2952 ,(2004) , 10.1016/J.ACTAMAT.2004.02.041
Nicolas Moulin, Estelle Parra-Denis, Dominique Jeulin, Christophe Ducottet, Annabelle Bigot, Elodie Boller, Eric Maire, Cécile Barat, Helmut Klöcker, Constituent Particle Break-Up During Hot Rolling of AA 5182** Advanced Engineering Materials. ,vol. 12, pp. 20- 29 ,(2010) , 10.1002/ADEM.200900241
S.A Court, K.M Gatenby, D.J Lloyd, Factors affecting the strength and formability of alloys based on Al–3 wt.% Mg Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 319, pp. 443- 447 ,(2001) , 10.1016/S0921-5093(00)02018-9
YJ Li, AMF Muggerud, A Olsen, T Furu, None, Precipitation of partially coherent α-Al(Mn,Fe)Si dispersoids and their strengthening effect in AA 3003 alloy Acta Materialia. ,vol. 60, pp. 1004- 1014 ,(2012) , 10.1016/J.ACTAMAT.2011.11.003
P. Ratchev, B. Verlinden, P. Van Houtte, Effect of preheat temperature on the orientation relationship of (Mn,Fe)Al6 precipitates in an AA 5182 Aluminium—Magnesium alloy Acta Metallurgica Et Materialia. ,vol. 43, pp. 621- 629 ,(1995) , 10.1016/0956-7151(94)00261-F
Zhenshan Liu, Volker Mohles, Olaf Engler, Günter Gottstein, Thermodynamics based modelling of the precipitation kinetics in commercial aluminium alloys Computational Materials Science. ,vol. 81, pp. 410- 417 ,(2014) , 10.1016/J.COMMATSCI.2013.08.049