Carbon fiber/epoxy composites: effect of zinc sulphide coated carbon nanotube on thermal and mechanical properties
作者： G. K. Maron , B. S. Noremberg , J. H. Alano , F. R. Pereira , V. G. Deon
DOI: 10.1007/S00289-017-2115-Y
关键词: Hydrothermal synthesis 、 Ultimate tensile strength 、 Raman spectroscopy 、 Materials science 、 Coating 、 Carbon nanotube 、 Epoxy 、 Thermogravimetric analysis 、 Carbon nanotube metal matrix composites 、 Composite material
摘要: In this study, composites based on carbon fiber and a modified epoxy resin were obtained. The modification the polymeric matrix was performed by adding functionalized multi-walled nanotubes coated with zinc sulphide particles (MWCNT-ZnS), synthetized hydrothermal synthesis assisted microwave. For comparison, samples containing only (MWCNTf) also tested. influences chemical, structural, mechanical, thermal properties of evaluated. filler characterization, X-ray diffraction, transmission electronic microscopy, Raman spectroscopy used. evaluated thermogravimetric analysis mechanical evaluation laminated made tensile impact tests. results showed that strength Young’s modulus increased presence nanofillers. absorbed energy had higher values for MWCNTf. It verified MWCNTf-ZnS more thermally stable, mainly due to ZnS coating MWCNTf surface.
springer.com
sci-hub.se 参考文章(53)
Tayyab Subhani, Munaisra Latif, Iftikhar Ahmad, Sobia A. Rakha, Naveed Ali, Aqeel A. Khurram, Mechanical performance of epoxy matrix hybrid nanocomposites containing carbon nanotubes and nanodiamonds Materials & Design. ,vol. 87, pp. 436- 444 ,(2015) , 10.1016/J.MATDES.2015.08.059
Shraddha Singh, V. K. Srivastava, Rajiv Prakash, Influences of carbon nanofillers on mechanical performance of epoxy resin polymer Applied Nanoscience. ,vol. 5, pp. 305- 313 ,(2015) , 10.1007/S13204-014-0319-0
Jimin Du, Lei Fu, Zhimin Liu, Buxing Han, Zhonghao Li, Yunqi Liu, Zhenyu Sun, Daoben Zhu, Facile Route to Synthesize Multiwalled Carbon Nanotube/Zinc Sulfide Heterostructures: Optical and Electrical Properties Journal of Physical Chemistry B. ,vol. 109, pp. 12772- 12776 ,(2005) , 10.1021/JP051284I
Xianhong Chen, Jianfeng Wang, Ming Lin, Wenbin Zhong, Tao Feng, Xiaohua Chen, Jianghua Chen, Feng Xue, Mechanical and thermal properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes Materials Science and Engineering: A. ,vol. 492, pp. 236- 242 ,(2008) , 10.1016/J.MSEA.2008.04.044
S. Laurenzi, S. Botti, A. Rufoloni, M.G. Santonicola, Fracture mechanisms in epoxy composites reinforced with carbon nanotubes Procedia Engineering. ,vol. 88, pp. 157- 164 ,(2014) , 10.1016/J.PROENG.2014.11.139
R. Kamalakannan, K. Ganesan, S. Ilango, N. Thirumurugan, V. N. Singh, M. Kamruddin, B. R. Mehta, A. K. Tyagi, The role of structural defects on the transport properties of a few-walled carbon nanotube networks Applied Physics Letters. ,vol. 98, pp. 192105- ,(2011) , 10.1063/1.3583583
Piyush R. Thakre, Yordanos Bisrat, Dimitris C. Lagoudas, Electrical and mechanical properties of carbon nanotube-epoxy nanocomposites Journal of Applied Polymer Science. ,vol. 116, pp. 191- 202 ,(2010) , 10.1002/APP.31122
O.K. Echendu, A.R. Weerasinghe, D.G. Diso, F. Fauzi, I.M. Dharmadasa, Characterization of n-Type and p-Type ZnS Thin Layers Grown by an Electrochemical Method Journal of Electronic Materials. ,vol. 42, pp. 692- 700 ,(2013) , 10.1007/S11664-012-2393-Y
K.M. Liew, Z.X. Lei, L.W. Zhang, Mechanical analysis of functionally graded carbon nanotube reinforced composites: A review Composite Structures. ,vol. 120, pp. 90- 97 ,(2015) , 10.1016/J.COMPSTRUCT.2014.09.041