Tribological properties of sulfurized-nitrided layer prepared by a two-step method
作者： Wen Yue , Xiaocheng Gao , Yuandong Liu , Xuejie Sun , Chengbiao Wang
DOI: 10.1016/J.VACUUM.2011.02.011
关键词: Nitriding 、 Composite material 、 Scanning electron microscope 、 Lubrication 、 Metallurgy 、 Lubricant 、 Microprobe 、 Materials science 、 Tribology 、 Layer (electronics) 、 X-ray photoelectron spectroscopy
摘要: Abstract The tribological properties of nitrided layer and sulfurized-nitrided AISI 4135 steel were investigated under oil lubrication, the layers prepared by ion nitriding treatment a two-step method as plus sulfurizing duplex treatment, respectively. A ball-on-disc friction wear tester was adopted to evaluate performance. Scanning electron microscope (SEM), scanning Auger microprobe (SAM) X-ray photoelectron spectroscope (XPS) used identify morphologies chemical compositions treated worn surface. It presented that sample with thin FeS possessed much better behaviors than sample, including load carrying capacity, resistance, reduction duration time. mechanism supposed decomposed activated S atoms promoted new reaction film formation, which induced playing solid lubricant for longer
harvard.edu
elsevier.com
sci-hub.se 参考文章(16)
Wang Hai-dou, Zhuang Da-ming, Wang Kun-lin, Liu Jia-jun, The comparison on tribological properties of ion sulfuration steels under oil lubrication Materials Letters. ,vol. 57, pp. 2225- 2232 ,(2003) , 10.1016/S0167-577X(02)01200-4
Jianqun Yang, Yong Liu, Zhuyu Ye, Dezhuang Yang, Shiyu He, Microstructure and tribological characteristics of nitrided layer on 2Cr13 steel in air and vacuum Surface & Coatings Technology. ,vol. 204, pp. 705- 712 ,(2009) , 10.1016/J.SURFCOAT.2009.09.015
Zhang Ning, Zhuang Da-Ming, Liu Jia-Jun, Fang Xiao-Dong, Guan Ming-Xi, Wear mechanism of ion-sulphurization layer on steel under dry conditions Wear. ,vol. 247, pp. 1- 8 ,(2001) , 10.1016/S0043-1648(00)00515-9
Yuan-Dong Liu, Cheng-Biao Wang, Jing-Jing Yuan, Jia-Jun Liu, Investigation on anti-wear properties of sulfide layer on bearing steel lubricated by oil-containing FeS particles Surface & Coatings Technology. ,vol. 205, pp. 470- 474 ,(2010) , 10.1016/J.SURFCOAT.2010.07.012
Zhang Ning, Zhuang Da-Ming, Liu Jia-Jun, Fang Xiao-Dong, Guan Ming-Xi, Effect of sulphide layers on the tribological behavior of steels under boundary lubrication conditions Applied Surface Science. ,vol. 181, pp. 61- 67 ,(2001) , 10.1016/S0169-4332(01)00360-9
Hai-dou Wang, Bin-shi Xu, Jia-jun Liu, Da-ming Zhuang, The friction–reduction model of the iron sulfide film prepared by plasma source ion sulfuration Surface & Coatings Technology. ,vol. 201, pp. 5236- 5239 ,(2007) , 10.1016/J.SURFCOAT.2006.07.226
Yang Li, Liang Wang, Dandan Zhang, Lie Shen, The effect of surface nanocrystallization on plasma nitriding behaviour of AISI 4140 steel Applied Surface Science. ,vol. 257, pp. 979- 984 ,(2010) , 10.1016/J.APSUSC.2010.08.004
Serdar Karaoğlu, Structural characterization and wear behavior of plasma-nitrided AISI 5140 low-alloy steel Materials Characterization. ,vol. 49, pp. 349- 357 ,(2002) , 10.1016/S1044-5803(03)00031-7
C.X. Li, T. Bell, Corrosion properties of plasma nitrided AISI 410 martensitic stainless steel in 3.5% NaCl and 1% HCl aqueous solutions Corrosion Science. ,vol. 48, pp. 2036- 2049 ,(2006) , 10.1016/J.CORSCI.2005.08.011
Yanqiu Xia, Feng Zhou, Shinya Sasaki, Takashi Murakami, Meihuan Yao, Remarkable friction stabilization of AISI 52100 steel by plasma nitriding under lubrication of alkyl naphthalene Wear. ,vol. 268, pp. 917- 923 ,(2010) , 10.1016/J.WEAR.2009.12.024