CO2 sequestration by mineral carbonation of steel slags under ambient temperature: parameters influence, and optimization.
作者： Alia Ben Ghacham , Louis-César Pasquier , Emmanuelle Cecchi , Jean-François Blais , Guy Mercier
DOI: 10.1007/S11356-016-6926-4
关键词:
摘要: This work focuses on the influence of different parameters efficiency steel slag carbonation in slurry phase under ambient temperature. In first part, a response surface methodology was used to identify effect and interactions gas pressure, liquid/solid (L/S) ratio, gas/liquid ratio (G/L), reaction time CO2 removed/sample optimize parameters. second parameters' dissolution its conversion into carbonates were studied more detail. The results show that pressure G/L have positive both CO2. These been correlated with higher mass introduced reactor. On other hand, an important L/S overall removal specifically carbonate precipitation has identified. best obtained ratios 4:1 10:1 respectively 0.046 0.052 gCO2 carbonated/g sample. yields achieved after 10 min reaction, at temperature, 10.68 bar total following direct treatment.
springer.com
sci-hub.se 参考文章(32)
Yasuro Katsuyama, Akihiro Yamasaki, Atsushi Iizuka, Minoru Fujii, Kazukiyo Kumagai, Yukio Yanagisawa, Development of a process for producing high-purity calcium carbonate (CaCO3) from waste cement using pressurized CO2 Environmental Progress. ,vol. 24, pp. 162- 170 ,(2005) , 10.1002/EP.10080
Rafael M. Santos, Jens Van Bouwel, Ellen Vandevelde, Gilles Mertens, Jan Elsen, Tom Van Gerven, Accelerated mineral carbonation of stainless steel slags for CO2 storage and waste valorization: effect of process parameters on geochemical properties International Journal of Greenhouse Gas Control. ,vol. 17, pp. 32- 45 ,(2013) , 10.1016/J.IJGGC.2013.04.004
Amin Azdarpour, Mohammad Asadullah, Erfan Mohammadian, Radzuan Junin, Hossein Hamidi, Muhammad Manan, Ahmad Rafizan Mohamad Daud, Mineral carbonation of red gypsum via pH-swing process: Effect of CO2 pressure on the efficiency and products characteristics Chemical Engineering Journal. ,vol. 264, pp. 425- 436 ,(2015) , 10.1016/J.CEJ.2014.11.125
Erin R. Bobicki, Qingxia Liu, Zhenghe Xu, Hongbo Zeng, Carbon capture and storage using alkaline industrial wastes. Progress in Energy and Combustion Science. ,vol. 38, pp. 302- 320 ,(2012) , 10.1016/J.PECS.2011.11.002
Hwanju Jo, Young-Nam Jang, Ho Young Jo, Influence of NaCl on mineral carbonation of CO2 using cement material in aqueous solutions Chemical Engineering Science. ,vol. 80, pp. 232- 241 ,(2012) , 10.1016/J.CES.2012.06.034
Arshe Said, Hannu-Petteri Mattila, Mika Järvinen, Ron Zevenhoven, Production of precipitated calcium carbonate (PCC) from steelmaking slag for fixation of CO2 Applied Energy. ,vol. 112, pp. 765- 771 ,(2013) , 10.1016/J.APENERGY.2012.12.042
Klaus S Lackner, Darryl P Butt, Christopher H Wendt, Progress on binding CO2 in mineral substrates Energy Conversion and Management. ,vol. 38, ,(1997) , 10.1016/S0196-8904(96)00279-8
Jian-li Li, Hui-ning Zhang, An-jun Xu, Jian Cui, Dong-feng He, Nai-yuan Tian, Theoretical and Experimental on Carbon Dioxide Sequestration Degree of Steel Slag Journal of Iron and Steel Research International. ,vol. 19, pp. 29- 32 ,(2012) , 10.1016/S1006-706X(13)60028-X
Mai Uibu, Rein Kuusik, Lale Andreas, Kalle Kirsimäe, The CO2 -binding by Ca-Mg-silicates in direct aqueous carbonation of oil shale ash and steel slag Energy Procedia. ,vol. 4, pp. 925- 932 ,(2011) , 10.1016/J.EGYPRO.2011.01.138
E.-E. Chang, Chung-Hua Chen, Yi-Hung Chen, Shu-Yuan Pan, Pen-Chi Chiang, Performance evaluation for carbonation of steel-making slags in a slurry reactor Journal of Hazardous Materials. ,vol. 186, pp. 558- 564 ,(2011) , 10.1016/J.JHAZMAT.2010.11.038