Wear Properties of Cast Aluminium Alloy 6061 Reinforced with Nanosilicon Carbide/Copper Hybrid Particles
作者： Xiao Dan Li , Hai Jun Yin , Jun Ping Ma
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMR.721.295
关键词:
摘要: Aluminium alloy 6061(AA6061) matrix composites were produced successfully by the stir casting method after a novel pre-treatment with reinforcements. The wear properties of investigated. results show that: nanosilicon carbide (SiC) particles embedded in solid copper (Cu) uniformly 24 h high-energy ball milling, and hybrid reinforced dispersed Al matrix; rate friction coefficient under various loads decreased as reinforcements weight increased from 0.2% to 0.4%.
sci-hub.se 参考文章(13)
S.Basavarajappa, G.Ch, ramohan, Wear Studies on Metal Matrix Composites: a Taguchi Approach Journal of Materials Science & Technology. ,vol. 21, pp. 845- 850 ,(2009)
S. Suresha, B.K. Sridhara, Effect of addition of graphite particulates on the wear behaviour in aluminium–silicon carbide–graphite composites Materials & Design. ,vol. 31, pp. 1804- 1812 ,(2010) , 10.1016/J.MATDES.2009.11.015
Y. Sahin, M. Acılar, Production and properties of SiCp-reinforced aluminium alloy composites Composites Part A-applied Science and Manufacturing. ,vol. 34, pp. 709- 718 ,(2003) , 10.1016/S1359-835X(03)00142-8
H.-J. Fecht, Nanostructure formation by mechanical attrition Nanostructured Materials. ,vol. 6, pp. 33- 42 ,(1995) , 10.1016/0965-9773(95)00027-5
R.K. Uyyuru, M.K. Surappa, S. Brusethaug, Effect of reinforcement volume fraction and size distribution on the tribological behavior of Al-composite/brake pad tribo-couple Wear. ,vol. 260, pp. 1248- 1255 ,(2006) , 10.1016/J.WEAR.2005.08.011
S.C. Lim, M. Gupta, L. Ren, J.K.M. Kwok, The tribological properties of Al–Cu/SiCp metal–matrix composites fabricated using the rheocasting technique Journal of Materials Processing Technology. ,vol. 89, pp. 591- 596 ,(1999) , 10.1016/S0924-0136(99)00067-9
J.K.M Kwok, S.C Lim, High-speed tribological properties of some Al/SiCp composites: I. Frictional and wear-rate characteristics Composites Science and Technology. ,vol. 59, pp. 55- 63 ,(1999) , 10.1016/S0266-3538(98)00055-4
S. Kumar, V. Balasubramanian, Developing a mathematical model to evaluate wear rate of AA7075/SiCp powder metallurgy composites Wear. ,vol. 264, pp. 1026- 1034 ,(2008) , 10.1016/J.WEAR.2007.08.006
S. Basavarajappa, G. Chandramohan, Arjun Mahadevan, Mukundan Thangavelu, R. Subramanian, P. Gopalakrishnan, Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite Wear. ,vol. 262, pp. 1007- 1012 ,(2007) , 10.1016/J.WEAR.2006.10.016
B.N.Pramila Bai, B.S. Ramasesh, M.K. Surappa, Dry sliding wear of A356-Al-SiCp composites Wear. ,vol. 157, pp. 295- 304 ,(1992) , 10.1016/0043-1648(92)90068-J