Preparation and Properties of Polypropylene/Vermiculite Nanocomposite Through Solid-State Shear Compounding (S3C) Method Using Pan-Mill Equipment
作者： Weiguo Shao , Qi Wang , Yinghong Chen , Yuan Gu
关键词:
摘要: ABSTRACT Nanocomposites of polypropylene (PP) and vermiculite (VMT) were successfully prepared by solid-state shear compounding (S3C) using pan-mill equipment without any compatibilizer. The structure morphology nanocomposites determined X-ray diffraction scanning transmission electron microscopy techniques, the crystallization behavior composites was differential calorimetry; thermal mechanical properties are also presented in paper. results show that VMT sheets partly exfoliated solid state intercalated formed PP matrix PP/VMT copowders, indicating S3C is a novel method to prepare polymer/vermiculite nanocomposites.
sci-hub.se 参考文章(27)
Masami Okamoto, Satoshi Morita, Hideyuki Taguchi, Yong Hoon Kim, Tadao Kotaka, Hiroshi Tateyama, Synthesis and structure of smectic clay/poly(methyl methacrylate) and clay/polystyrene nanocomposites via in situ intercalative polymerization Polymer. ,vol. 41, pp. 3887- 3890 ,(2000) , 10.1016/S0032-3861(99)00655-2
Xiaohui Liu, Qiuju Wu, PP/clay nanocomposites prepared by grafting-melt intercalation Polymer. ,vol. 42, pp. 10013- 10019 ,(2001) , 10.1016/S0032-3861(01)00561-4
M.H. Loretto, R.E. Smallman, An assessment of high voltage electron microscopy (HVEM). An invited review Materials Science and Engineering. ,vol. 28, pp. 1- 32 ,(1977) , 10.1016/0025-5416(77)90085-4
X Fu, S Qutubuddin, Polymer–clay nanocomposites: exfoliation of organophilic montmorillonite nanolayers in polystyrene Polymer. ,vol. 42, pp. 807- 813 ,(2001) , 10.1016/S0032-3861(00)00385-2
J.W Cho, D.R Paul, Nylon 6 nanocomposites by melt compounding Polymer. ,vol. 42, pp. 1083- 1094 ,(2001) , 10.1016/S0032-3861(00)00380-3
Arimitsu Usuki, Akihiko Koiwai, Yoshitsugu Kojima, Masaya Kawasumi, Akane Okada, Toshio Kurauchi, Osami Kamigaito, Interaction of nylon 6‐clay surface and mechanical properties of nylon 6‐clay hybrid Journal of Applied Polymer Science. ,vol. 55, pp. 119- 123 ,(1995) , 10.1002/APP.1995.070550113
Pravin Kodgire, Rajendra Kalgaonkar, Sangeeta Hambir, Neelima Bulakh, J. P. Jog, PP/clay nanocomposites: Effect of clay treatment on morphology and dynamic mechanical properties Journal of Applied Polymer Science. ,vol. 81, pp. 1786- 1792 ,(2001) , 10.1002/APP.1611
Qi Wang, Jizhuang Cao, Jingui Huang, Xi Xu, A study on the pan-milling process and the pulverizing efficiency of pan-mill type equipment Polymer Engineering and Science. ,vol. 37, pp. 1091- 1101 ,(1997) , 10.1002/PEN.11754
Weiguo Shao, Qi Wang, Hong Ma, Study of polypropylene/montmorillonite nanocomposites prepared by solid-state shear compounding (S3C) using pan-mill equipment: the morphology of montmorillonite and thermal properties of the nanocomposites Polymer International. ,vol. 54, pp. 336- 341 ,(2005) , 10.1002/PI.1683
Guillermo Jimenez, Nobuo Ogata, Hidekazu Kawai, Takashi Ogihara, Structure and thermal/mechanical properties of poly (∈-caprolactone)-clay blend Journal of Applied Polymer Science. ,vol. 64, pp. 2211- 2220 ,(1997) , 10.1002/(SICI)1097-4628(19970613)64:11<2211::AID-APP17>3.0.CO;2-6