Evaluation of mechanical and thermal properties of epoxy composites reinforced with CaSiO3 particulate fillers
作者： Anuja H. Karle , Masnaji R. Nukulwar , Vinod B. Tungikar
DOI: 10.1016/J.MATPR.2020.08.188
关键词:
摘要: Abstract In the present numerical and experimental work, performance of epoxy composites with Wollastonite (CaSiO3) micro-particles that are systematically introduced into an matrix for reinforcement purposes is evaluated presented. Magnetic stirrer used to achieve homogeneous dispersion resin. The influence CaSiO3 particles on hardness, flexural strength impact was investigated. It found incorporation yield effective improvement resin a micro-particle content 1–2 wt%. Composites reinforced these showed increase in mechanical properties when compared neat Further, thermal behavior both, filler has been studied by Thermogravimetric analysis (TGA), reveal stability composites. addition, mathematical models developed using Minitab 17 software. revealed high degree correlation between predicted values.
sci-hub.st 参考文章(17)
Vijay Baheti, Jiri Militky, Rajesh Mishra, B.K. Behera, Thermomechanical properties of glass fabric/epoxy composites filled with fly ash Composites Part B-engineering. ,vol. 85, pp. 268- 276 ,(2016) , 10.1016/J.COMPOSITESB.2015.09.049
C. Kanchanomai, N. Noraphaiphipaksa, Y. Mutoh, Wear characteristic of epoxy resin filled with crushed-silica particles Composites Part B-engineering. ,vol. 42, pp. 1446- 1452 ,(2011) , 10.1016/J.COMPOSITESB.2011.04.046
Asma Yasmin, Isaac M. Daniel, Mechanical and thermal properties of graphite platelet/epoxy composites Polymer. ,vol. 45, pp. 8211- 8219 ,(2004) , 10.1016/J.POLYMER.2004.09.054
T. Niranjana Prabhu, Y. J. Hemalatha, V. Harish, K. Prashantha, P. Iyengar, Thermal degradation of epoxy resin reinforced with polypropylene fibers Journal of Applied Polymer Science. ,vol. 104, pp. 500- 503 ,(2007) , 10.1002/APP.25523
Sandhyarani Biswas, Alok Satapathy, Tribo-performance analysis of red mud filled glass-epoxy composites using Taguchi experimental design Materials & Design. ,vol. 30, pp. 2841- 2853 ,(2009) , 10.1016/J.MATDES.2009.01.018
V. K. Srivastava, P. S. Shembekar, Tensile and fracture properties of epoxy resin filled with flyash particles Journal of Materials Science. ,vol. 25, pp. 3513- 3516 ,(1990) , 10.1007/BF00575379
Rahul Kumar, Kausik Kumar, Prasanta Sahoo, Sumit Bhowmik, Study of Mechanical Properties of Wood Dust Reinforced Epoxy Composite Procedia Materials Science. ,vol. 6, pp. 551- 556 ,(2014) , 10.1016/J.MSPRO.2014.07.070
Sudarshan, M.K. Surappa, Synthesis of fly ash particle reinforced A356 Al composites and their characterization Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 480, pp. 117- 124 ,(2008) , 10.1016/J.MSEA.2007.06.068
Bernd Wetzel, Frank Haupert, Ming Qiu Zhang, Epoxy nanocomposites with high mechanical and tribological performance Composites Science and Technology. ,vol. 63, pp. 2055- 2067 ,(2003) , 10.1016/S0266-3538(03)00115-5
I. O. Oladele, N. I. Agbeboh, Development of mathematical models and estimation for the mechanical properties of organic fiber reinforced polyester composites Fibers and Polymers. ,vol. 18, pp. 1336- 1345 ,(2017) , 10.1007/S12221-017-1064-2