Dimensional precision of implant-supported frameworks fabricated by 3D printing.

作者: Anna Gabriella Camacho Presotto , Valentim Adelino Ricardo Barão , Cláudia Lopes Brilhante Bhering , Marcelo Ferraz Mesquita

DOI: 10.1016/J.PROSDENT.2019.01.019

关键词:

摘要: Abstract Statement of problem Selective laser melting (SLM) is a promising additive technology for clinical practice, but data on dimensional precision assessed by marginal fit combined with stress and strain investigations implant-supported fixed partial dentures (FPDs) are lacking. Purpose The purpose this in vitro study was to verify whether the SLM manufacturing provides better 3-unit FPD frameworks than subtractive soft metal block (SMB) milling standard casting technique. Material methods Thirty FPDs Co-Cr were made casting, SMB milling, (n=10). between framework implant abutment evaluated photoelastic (PH) gauge (SG) models. Stress in system measured quantitative PH SG analyses after prosthetic screw tightening. Data subjected Kruskal-Wallis test, Mann-Whitney U Spearman correlation test (α=.05). Results method affected (P Conclusions Three-unit using showed those obtained or methods.

参考文章(29)
Joerg R. Strub, E. Dianne Rekow, Siegbert Witkowski, Computer-aided design and fabrication of dental restorations: current systems and future possibilities. Journal of the American Dental Association. ,vol. 137, pp. 1289- 1296 ,(2006) , 10.14219/JADA.ARCHIVE.2006.0389
Matthias Karl, Stefan Holst, None, Strain development of screw-retained implant-supported fixed restorations: procera implant bridge versus conventionally cast restorations. International Journal of Prosthodontics. ,vol. 25, pp. 166- 169 ,(2012)
Jaafar Abduo, Vincent Bennani, Neil Waddell, Karl Lyons, Michael Swain, Fit of screw-retained fixed implant frameworks fabricated by different methods: a systematic review. International Journal of Prosthodontics. ,vol. 24, pp. 207- 220 ,(2011)
Lars Hjalmarsson, Anders Örtorp, Jan-Ivan Smedberg, Torsten Jemt, Precision of Fit to Implants: A Comparison of Cresco™ and Procera® Implant Bridge Frameworks Clinical Implant Dentistry and Related Research. ,vol. 12, pp. 271- 280 ,(2010) , 10.1111/J.1708-8208.2009.00171.X
Giorgio Pompa, Stefano Di Carlo, Francesca De Angelis, Maria Paola Cristalli, Susanna Annibali, Comparison of Conventional Methods and Laser-Assisted Rapid Prototyping for Manufacturing Fixed Dental Prostheses: An In Vitro Study BioMed Research International. ,vol. 2015, pp. 318097- 318097 ,(2015) , 10.1155/2015/318097
Raquel Castillo-Oyagüe, Christopher D Lynch, Andrés S Turrión, José F López-Lozano, Daniel Torres-Lagares, María-Jesús Suárez-García, None, Misfit and microleakage of implant-supported crown copings obtained by laser sintering and casting techniques, luted with glass-ionomer, resin cements and acrylic/urethane-based agents Journal of Dentistry. ,vol. 41, pp. 90- 96 ,(2013) , 10.1016/J.JDENT.2012.09.014
Manoj Kumar Sundar, Satish Babu Chikmagalur, Fayaz Pasha, Marginal fit and microleakage of cast and metal laser sintered copings—An in vitro study Journal of Prosthodontic Research. ,vol. 58, pp. 252- 258 ,(2014) , 10.1016/J.JPOR.2014.07.002
Danilo Gonzaga B de França, Maria Helena ST Morais, Flávio D das Neves, Gustavo AS Barbosa, None, Influence of CAD/CAM on the fit accuracy of implant-supported zirconia and cobalt-chromium fixed dental prostheses Journal of Prosthetic Dentistry. ,vol. 113, pp. 22- 28 ,(2015) , 10.1016/J.PROSDENT.2014.07.010
Richard van Noort, The future of dental devices is digital. Dental Materials. ,vol. 28, pp. 3- 12 ,(2012) , 10.1016/J.DENTAL.2011.10.014