Establishing the optimum vessel maintenance approach based on system reliability and criticality analysis
作者： Osman Turan , Sol Judah , Iraklis Lazakis
DOI:
关键词:
摘要: Maritime maintenance is a key feature of the operational profile ship throughout its life cycle. In this paper, application optimum approach onboard Diving Support Vessel (DSV) investigated through introduction innovative Reliability and Criticality Based Maintenance (RCBM). At first, study reliability criticality analysis main systems vessel performed. These include Propulsion, Lifting, Anchoring & Hauling systems. Moreover, by using Dynamic Fault Tree Analysis (DFTA) tool Birnbaum (Bir), (Cri) Fussell-Vesely (F-V) importance measures, validation abovementioned results occurs. Remedial measures regarding specific critical items/components identified are also suggested introduced in terms dynamic ‘SPARE’ gates DFT structure for each system examined. on obtained with approach, further suggestions discussion one subject takes place.
strath.ac.uk参考文章(9)
B.S. Dhillon, Design Reliability: Fundamentals and Applications ,(1999)
Iraklis Lazakis, Establishing an innovative and integrated reliability and criticality based maintenance strategy for the maritime industry University of Strathclyde. ,(2011)
Serap Aksu, Seref Aksu, Osman Turan, Reliability and Availability of Pod Propulsion Systems Quality and Reliability Engineering International. ,vol. 22, pp. 41- 58 ,(2006) , 10.1002/QRE.747
Iraklis Lazakis, Osman Turan, Seref Aksu, Increasing ship operational reliability through the implementation of a holistic maintenance management strategy Ships and Offshore Structures. ,vol. 5, pp. 337- 357 ,(2010) , 10.1080/17445302.2010.480899
Marko Čepin, Borut Mavko, A dynamic fault tree Reliability Engineering & System Safety. ,vol. 75, pp. 83- 91 ,(2002) , 10.1016/S0951-8320(01)00121-1
O. Turan, I. Lazakis, S. Judah, A. Incecik, Investigating the reliability and criticality of the maintenance characteristics of a diving support vessel Quality and Reliability Engineering International. ,vol. 27, pp. 931- 946 ,(2011) , 10.1002/QRE.1182
K. Durga Rao, V. Gopika, V.V.S. Sanyasi Rao, H.S. Kushwaha, A.K. Verma, A. Srividya, Dynamic fault tree analysis using Monte Carlo simulation in probabilistic safety assessment Reliability Engineering & System Safety. ,vol. 94, pp. 872- 883 ,(2009) , 10.1016/J.RESS.2008.09.007
J.B. Dugan, K.J. Sullivan, D. Coppit, Developing a low-cost high-quality software tool for dynamic fault-tree analysis IEEE Transactions on Reliability. ,vol. 49, pp. 49- 59 ,(2000) , 10.1109/24.855536
Ken Gardner, Barry Snider, Robert M. Conachey, Development of machinery survey requirements based on reliability-centered maintenance. Discussion Transactions of the Society of Naval Architects and Marine Engineers. ,vol. 113, pp. 204- 223 ,(2005)