Investigation of accuracy and dimensional limits of part produced in aluminum alloy by selective laser melting
作者： F. Calignano , M. Lorusso , J. Pakkanen , F. Trevisan , E. P. Ambrosio
DOI: 10.1007/S00170-016-8788-9
关键词:
摘要: … So, following the guidelines present in the literature [15–17], in this study, the limits of accuracy of the parts produced in aluminum (AlSi10Mg) alloy by selective laser melting (SLM) …
springer.com
sci-hub.se 参考文章(45)
Daniel Thomas, The development of design rules for selective laser melting University of Wales. ,(2009)
I. Owen, C. J. Sutcliffe, S. Tsopanos, The Manufacture of Micro Cross-Flow Heat Exchangers by Selective Laser Melting ,(2005)
S.H. Masood, W. Rattanawong, A Generic Part Orientation System Based on Volumetric Error in Rapid Prototyping The International Journal of Advanced Manufacturing Technology. ,vol. 19, pp. 209- 216 ,(2002) , 10.1007/S001700200015
F. Xu, Y.S. Wong, H.T. Loh, Toward generic models for comparative evaluation and process selection in rapid prototyping and manufacturing Journal of Manufacturing Systems. ,vol. 19, pp. 283- 296 ,(2001) , 10.1016/S0278-6125(01)89001-4
A.G. Evans, J.W. Hutchinson, N.A. Fleck, M.F. Ashby, H.N.G. Wadley, The topological design of multifunctional cellular metals Progress in Materials Science. ,vol. 46, pp. 309- 327 ,(2001) , 10.1016/S0079-6425(00)00016-5
Suman Das, Joseph J. Beama, Martin Wohlert, David L. Bourell, Direct laser freeform fabrication of high performance metal components Rapid Prototyping Journal. ,vol. 4, pp. 112- 117 ,(1998) , 10.1108/13552549810222939
Yong-Ak Song, Wilfried Koenig, Experimental Study of the Basic Process Mechanism for Direct Selective Laser Sintering of Low-Melting Metallic Powder CIRP Annals. ,vol. 46, pp. 127- 130 ,(1997) , 10.1016/S0007-8506(07)60790-2
R.I. Campbell, M. Martorelli, H.S. Lee, Surface roughness visualisation for rapid prototyping models Computer-Aided Design. ,vol. 34, pp. 717- 725 ,(2002) , 10.1016/S0010-4485(01)00201-9
Jibin Zhao, Renbo Xia, Weijun Liu, Huabing Wang, A computing method for accurate slice contours based on an STL model Virtual and Physical Prototyping. ,vol. 4, pp. 29- 37 ,(2009) , 10.1080/17452750902718219
J.P. Kruth, Material incress manufacturing by rapid prototyping techniques CIRP Annals. ,vol. 40, pp. 603- 614 ,(1991) , 10.1016/S0007-8506(07)61136-6