SHEAR STRENGTH OF HEAT-TREATED TALI (ERYTHROPHLEUM IVORENSE A. CHEV. ) AND IROKO (CHLOROPHORA EXCELSA ) WOODS WITH VARIOUS ADHESIVES
作者： Suat Altun , Hamiyet Şahin Kol , Günay Özbay
DOI:
关键词:
摘要: The aim of this study was to evaluate the effect heat treatment on shear strength tali (Erythrophleum ivorense) and iroko (Chlorophora excelsa) woods, bonded with some structural adhesives. Shear untreated heat-treated woods phenol-formaldehyde (PF), melamine-urea-formaldehyde (MUF), melamine-formaldehyde (MF), polyurethane (PUR) adhesives studied. An industrial method (ThermoWood) used. timbers were thermally modified for 2 hours at 180 oC. Laminated samples having two sample sets prepared from wood test. results tests showed that affected laminated negatively. Although there a considerable difference in adhesive bond between treated wood, both species fulfilled required value bonds. PF, MUF, MF, PUR performed rather similar way species.
cabdirect.org参考文章(16)
W. Paul, M. Ohlmeyer, H. Leithoff, Thermal modification of OSB-strands by a one-step heat pre-treatment – Influence of temperature on weight loss, hygroscopicity and improved fungal resistance European Journal of Wood and Wood Products. ,vol. 65, pp. 57- 63 ,(2007) , 10.1007/S00107-006-0146-4
Dennis Johansson, Tom Morén, The potential of colour measurement for strength prediction of thermally treated wood European Journal of Wood and Wood Products. ,vol. 64, pp. 104- 110 ,(2006) , 10.1007/S00107-005-0082-8
Sini Metsä-Kortelainen, Toni Antikainen, Pertti Viitaniemi, The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170 ◦ C, 190 ◦ C, 210 ◦ C and 230 ◦ C European Journal of Wood and Wood Products. ,vol. 64, pp. 192- 197 ,(2006) , 10.1007/S00107-005-0063-Y
Milan Sernek, Michiel Boonstra, Antonio Pizzi, Aurelien Despres, Philippe Gérardin, Bonding performance of heat treated wood with structural adhesives Holz als Roh- und Werkstoff. ,vol. 66, pp. 173- 180 ,(2008) , 10.1007/S00107-007-0218-0
M. Kumer, M. Šernek, F. Pohleven, M. Humar, Bonding of thermally modified spruce with PF and UF adhesives. Bonding of modified wood. Proceedings of the 5th COST E34 International Workshop, Bled, Slovenia, 6th September, 2007.. pp. 31- 38 ,(2007)
M. Pétrissans, P. Gérardin, I. El bakali, M. Serraj, Wettability of heat-treated wood Holzforschung. ,vol. 57, pp. 301- 307 ,(2003) , 10.1515/HF.2003.045
Elisabeth Windeisen, Claudia Strobel, Gerd Wegener, Chemical changes during the production of thermo-treated beech wood Wood Science and Technology. ,vol. 41, pp. 523- 536 ,(2007) , 10.1007/S00226-007-0146-5
Mohammed Hakkou, Mathieu Pétrissans, André Zoulalian, Philippe Gérardin, Investigation of wood wettability changes during heat treatment on the basis of chemical analysis Polymer Degradation and Stability. ,vol. 89, pp. 1- 5 ,(2005) , 10.1016/J.POLYMDEGRADSTAB.2004.10.017
M. Šernek, F. A. Kamke, W. G. Glasser, Comparative Analysis of Inactivated Wood Surfaces Holzforschung. ,vol. 58, pp. 22- 31 ,(2004) , 10.1515/HF.2004.004
Saip Nami Kartal, Won-Joung Hwang, Yuji Imamura, Water absorption of boron-treated and heat-modified wood Journal of Wood Science. ,vol. 53, pp. 454- 457 ,(2007) , 10.1007/S10086-007-0877-9