Adhesive bonding of beech wood modified with a phenol formaldehyde compound
作者： Stergios Adamopoulos , Alireza Bastani , Patricia Gascón-Garrido , Holger Militz , Carsten Mai
DOI: 10.1007/S00107-012-0620-0
关键词:
摘要: Untreated (controls) and phenol–formaldehyde (PF)-modified beech wood (10 25 % solid content) were glued with phenol resorcinol formaldehyde (PRF) polyvinyl acetate (PVAc). Shear strength of PRF-bonded specimens was higher than that PVAc-bonded ones under dry wet conditions irrespective the pre-treatment. Under conditions, only exhibited reduction in shear due to PF-modification PF concentration as compared controls. treated provided inferior bonding exception PRF adhesive. Modification resulted a decrease adhesive penetration into porous network interconnected cells, especially at concentration.
springer.com
core.ac.uk
paperity.org参考文章(17)
Callum A. S. Hill, Wood Modification: Chemical, Thermal and Other Processes ,(2006)
M. Šernek, R. Brandon, R. E. Ibach, C. R. Frihart, C. G. Hunt, What does bonding to modified wood tell us about adhesion Bonding of modified wood : proceedings of the 5th COST E34 International Workshop, Bled, Slovenia, September 6th, 2007. Ljubljana : Biotechnical Faculty, Dept. of Wood Science and Technology, 2007: [10] pages.. pp. 47- 56 ,(2007)
Milan Sernek, Michiel Boonstra, Antonio Pizzi, Aurelien Despres, Philippe Gérardin, Bonding performance of heat treated wood with structural adhesives Holz als Roh- und Werkstoff. ,vol. 66, pp. 173- 180 ,(2008) , 10.1007/S00107-007-0218-0
Chris P. Gabrielli, Frederick A. Kamke, Phenol–formaldehyde impregnation of densified wood for improved dimensional stability Wood Science and Technology. ,vol. 44, pp. 95- 104 ,(2010) , 10.1007/S00226-009-0253-6
Kosuke Ohmae, Kazuya Minato, Misato Norimoto, The Analysis of Dimensional Changes Due to Chemical Treatments and Water Soaking for Hinoki (Chamaecyparis obtusa) Wood Holzforschung. ,vol. 56, pp. 98- 102 ,(2002) , 10.1515/HF.2002.016
Alfred J. Stamm, R. M. Seborg, Resin-Treated Plywood Industrial & Engineering Chemistry. ,vol. 31, pp. 897- 902 ,(1939) , 10.1021/IE50355A023
C.B. Vick, R.M. Rowell, Adhesive bonding of acetylated wood International Journal of Adhesion and Adhesives. ,vol. 10, pp. 263- 272 ,(1990) , 10.1016/0143-7496(90)90044-X
H. Kajita, T. Furuno, Y. Imamura, The modification of wood by treatment with low molecular weight phenol-formaldehyde resin: a properties enhancement with neutralized phenolic-resin and resin penetration into wood cell walls Wood Science and Technology. ,vol. 37, pp. 349- 361 ,(2004) , 10.1007/S00226-003-0176-6
C.B. Vick, P.Ch. Larsson, R.L. Mahlberg, R. Simonson, R.M. Rowell, Structural bonding of acetylated Scandinavian softwoods for exterior lumber laminates International Journal of Adhesion and Adhesives. ,vol. 13, pp. 139- 149 ,(1993) , 10.1016/0143-7496(93)90035-8
Suat Altun, Hamiyet Şahin Kol, Günay Özbay, SHEAR STRENGTH OF HEAT-TREATED TALI (ERYTHROPHLEUM IVORENSE A. CHEV. ) AND IROKO (CHLOROPHORA EXCELSA ) WOODS WITH VARIOUS ADHESIVES Bioresources. ,vol. 4, pp. 1545- 1554 ,(2009)