Effect of silver-organic precursor on friction and wear

作者: Ningning Hu , Jiguang Han , Bo Hu

DOI: 10.1108/ILT-06-2011-0043

关键词:

摘要: Purpose – The purpose of this paper is to study the effect silver (Ag) precursor on friction and wear. Design/methodology/approach Thermogravimetric analysis oil with Ag X-ray diffraction decomposition product complex were performed. tribological behavior was evaluated a UMT-3M Tribometer (CETR) using pure military-grade lubricant prepared at room temperature 300°C. Energy-dispersive spectroscopy chemical composition wear scar Findings When there 1 weight per cent in lubricant, coefficient reduces by about 8 14 300°C, probability also decreases, from moderate mild There more productions which could form metal boundary films possessing low shearing stress excellent lubricity Originality/value precursors used as additives lubric...

参考文章(14)
Kyung-Hwang Lee, Osamu Takai, Myeong-Hoon Lee, Tribological and corrosive properties of silver thin films prepared by e-beam ion plating method Surface and Coatings Technology. ,vol. 169-170, pp. 695- 698 ,(2003) , 10.1016/S0257-8972(03)00143-9
N. Maréchal, E. Quesnel, P. Juliet, Y. Pauleau, C. Zimmermann, Tribological properties of thin silver films sputter-deposited on superalloy substrates Thin Solid Films. ,vol. 249, pp. 70- 77 ,(1994) , 10.1016/0040-6090(94)90087-6
L. M. Gindin, V. V. Ovsyannikov, Yu. T. Sudakov, Calculation of lubricating oil viscosity at a given temperature Chemistry and Technology of Fuels and Oils. ,vol. 22, pp. 612- 615 ,(1986) , 10.1007/BF01110476
Matthew N. McCain, Sven Schneider, Michael R. Salata, Tobin J. Marks, Tris(phosphino)borato silver(I) complexes as precursors for metallic silver aerosol-assisted chemical vapor deposition. Inorganic Chemistry. ,vol. 47, pp. 2534- 2542 ,(2008) , 10.1021/IC701852X
L. Gao, P. Härter, Ch. Linsmeier, A. Wiltner, R. Emling, D. Schmitt-Landsiedel, Silver metal organic chemical vapor deposition for advanced silver metallization Microelectronic Engineering. ,vol. 82, pp. 296- 300 ,(2005) , 10.1016/J.MEE.2005.07.078
B.-R Höhn, K Michaelis, Influence of oil temperature on gear failures Tribology International. ,vol. 37, pp. 103- 109 ,(2004) , 10.1016/S0301-679X(03)00047-1
Xiangyou Li, Jianguo Liu, Xiaoye Wang, Ming Gao, Zemin Wang, Xiaoyan Zeng, Preparation of silver spheres by selective laser heating in silver-containing precursor solution. Optics Express. ,vol. 19, pp. 2846- 2851 ,(2011) , 10.1364/OE.19.002846
Ionel Halaciuga, Dan V. Goia, Preparation of silver spheres by aggregation of nanosize subunits Journal of Materials Research. ,vol. 23, pp. 1776- 1784 ,(2008) , 10.1557/JMR.2008.0219