Novel Method for Recycle Epoxy Resin from Waste Printed Circuit Board
作者： Rapeephun Dangtungee , Suchart Siengchin , Chaisiri Kitpaosong
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMR.931-932.90
关键词:
摘要: This research was aimed to study and develop a method for recycle epoxy resin from waste printed circuit board by hot solvent methods DMSO/NaOH catalytic extraction method. It found that the pressure tank system, sub set of method, variable as following; 15 bar, temperature 80 °C, reaction time 6 h ethyl acetate presented maximum yield 50.46 %, while system at 145 °C 5 42.97 %. Recycled resin, final product were showed similarly clear orange-yellow high viscosity. Comparatively, slightly darker color than system. Functional group 3000-2850, 1480-1540 1020-1040 cm-1, characterized Fourier transform infrared spectroscopy (FT-IR), indicated both alkane, aromatic, phenyl-O-C group, respectively. could be confirmed beneficial functional recycled appeared new resin.
sci-hub.se 参考文章(12)
Hideyuki Tagaya, Jun-ichi Kadokawa, Yu-ichi Suzuki, Naomi Komuro, Reactions of model compounds of phenol resin in sub- and supercritical water under an argon atmosphere Journal of Material Cycles and Waste Management. ,vol. 3, pp. 32- 37 ,(2001) , 10.1007/S10163-000-0031-X
Weirong Dang, Masatoshi Kubouchi, Hideki Sembokuya, Ken Tsuda, Chemical recycling of glass fiber reinforced epoxy resin cured with amine using nitric acid Polymer. ,vol. 46, pp. 1905- 1912 ,(2005) , 10.1016/J.POLYMER.2004.12.035
Shinn-Jen Chang, Yuung-Ching Sheen, Rong-Shuh Chang, Feng-Chih Chang, The thermal degradation of phosphorus-containing copolyesters Polymer Degradation and Stability. ,vol. 54, pp. 365- 371 ,(1996) , 10.1016/S0141-3910(96)00064-X
R. Dangtungee, S. Somchua, S. Siengchin, Recycling Glass Fiber/Epoxy Resin of Waste Printed Circuit Boards: Morphology and Mechanical properties Mechanics of Composite Materials. ,vol. 48, pp. 325- 330 ,(2012) , 10.1007/S11029-012-9279-1
M.P Luda, A.I Balabanovich, G Camino, Thermal decomposition of fire retardant brominated epoxy resins Journal of Analytical and Applied Pyrolysis. ,vol. 65, pp. 25- 40 ,(2002) , 10.1016/S0165-2370(01)00175-9
Xiaodong Wang, Qiang Zhang, Synthesis, characterization, and cure properties of phosphorus-containing epoxy resins for flame retardance European Polymer Journal. ,vol. 40, pp. 385- 395 ,(2004) , 10.1016/J.EURPOLYMJ.2003.09.023
P. Zhu, Y. Chen, L.Y. Wang, M. Zhou, J. Zhou, The separation of waste printed circuit board by dissolving bromine epoxy resin using organic solvent. Waste Management. ,vol. 33, pp. 484- 488 ,(2013) , 10.1016/J.WASMAN.2012.10.003
Weirong Dang, Masatoshi Kubouchi, Shurou Yamamoto, Hideki Sembokuya, Ken Tsuda, An approach to chemical recycling of epoxy resin cured with amine using nitric acid Polymer. ,vol. 43, pp. 2953- 2958 ,(2002) , 10.1016/S0032-3861(02)00100-3
Jia Li, Hongzhou Lu, Jie Guo, Zhenming Xu, Yaohe Zhou, Recycle technology for recovering resources and products from waste printed circuit boards. Environmental Science & Technology. ,vol. 41, pp. 1995- 2000 ,(2007) , 10.1021/ES0618245
Kui Huang, Jie Guo, Zhenming Xu, Recycling of waste printed circuit boards: a review of current technologies and treatment status in China. Journal of Hazardous Materials. ,vol. 164, pp. 399- 408 ,(2009) , 10.1016/J.JHAZMAT.2008.08.051