Modeling and Optimization of Process Parameters for Defect Toleranced Drilling of GFRP Composites
作者： S. Arul , D. Samuel Raj , L. Vijayaraghavan , S. K. Malhotra , R. Krishnamurthy
DOI: 10.1080/10426910500411587
关键词:
摘要: Drilling is a frequently practiced machining process for fiber-reinforced plastics (FRP) in industry owing to the need component assembly mechanical structures. experiments are performed on (0/±45/90)2s 3-mm-thick glass laminate using 4-, 6- and 8-mm-diameter HSS drills. The response of quasi-isotropic was studied by monitoring thrust torque. performance drills different cutting conditions measuring tool wear. Delamination due drilling major concern composite analyzed linear elastic fracture mechanics, classical plate bending theory, mechanics composites. A model evaluating critical at which delamination initiated ply locations has been used, force onset found be 70 N. present work analyzes data force, torque, life u...
sci-hub.se 参考文章(20)
Stanley J. Farlow, Self-Organizing Methods in Modeling: Gmdh Type Algorithms ,(1984)
Frédéric Lachaud, Robert Piquet, Francis Collombet, Laurent Surcin, Drilling of composite structures Composite Structures. ,vol. 52, pp. 511- 516 ,(2001) , 10.1016/S0263-8223(01)00040-X
Chung-Chen Tsao, Wen-Chou Chen, Prediction of the location of delamination in the drilling of composite laminates Journal of Materials Processing Technology. ,vol. 70, pp. 185- 189 ,(1997) , 10.1016/S0924-0136(97)00059-9
H. Ho-Cheng, C. K. H. Dharan, Delamination During Drilling in Composite Laminates Journal of Engineering for Industry. ,vol. 112, pp. 236- 239 ,(1990) , 10.1115/1.2899580
W. König, P. Graß, Quality Definition and Assessment in Drilling of Fibre Reinforced Thermosets CIRP Annals. ,vol. 38, pp. 119- 124 ,(1989) , 10.1016/S0007-8506(07)62665-1
V. Chandrasekharan, S. G. Kapoor, R. E. DeVor, A Mechanistic Approach to Predicting the Cutting Forces in Drilling: With Application to Fiber-Reinforced Composite Materials Journal of Engineering for Industry. ,vol. 117, pp. 559- 570 ,(1995) , 10.1115/1.2803534
J.Paulo Davim, Pedro Reis, C.Conceição António, Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up Composites Science and Technology. ,vol. 64, pp. 289- 297 ,(2004) , 10.1016/S0266-3538(03)00253-7
W. König, Ch. Wulf, P. Graß, H. Willerscheid, Machining of Fibre Reinforced Plastics CIRP Annals. ,vol. 34, pp. 537- 548 ,(1985) , 10.1016/S0007-8506(07)60186-3
H. Hocheng, H.Y. Puw, On drilling characteristics of fiber-reinforced thermoset and thermoplastics International Journal of Machine Tools & Manufacture. ,vol. 32, pp. 583- 592 ,(1992) , 10.1016/0890-6955(92)90047-K
L-B Zhang, L-J Wang, X-Y Liu, A mechanical model for predicting critical thrust forces in drilling composite laminates Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ,vol. 215, pp. 135- 146 ,(2001) , 10.1243/0954405011515235