Indentation parameters influence on the ultimate strength of panels for different stiffeners
作者： John H. Chujutalli , Segen F. Estefen , C. Guedes Soares
DOI: 10.1016/J.JCSR.2020.106097
关键词:
摘要: Abstract This paper focuses on the study of influence indentation parameters ultimate strength and behavior damaged panels for two types stiffeners, through an experimental-numerical correlation a parametric study. Experiments were performed using stiffened in small-scale models, with stiffener type T flat-bar, representing typical full-scale bottom deck ship, respectively. A series tests have been carried out plate-stiffener intersection where force displacement pattern are analyzed each stiffener. After indentation, panel model is submitted to uniaxial compression test, order measure loss relation intact one. Numerical simulations by finite element program both collapse. The results from numerical-experimental presented good agreement. Therefore, analyze parameters, such as, dent depth, indenter size, location column slenderness. research work contributes better understanding define more robust safe design bases, as well support decision repair procedures.
sci-hub.st 参考文章(42)
S. Saad-Eldeen, Y. Garbatov, C. Guedes Soares, Stress–strain analysis of dented rectangular plates subjected to uni-axial compressive loading Engineering Structures. ,vol. 99, pp. 78- 91 ,(2015) , 10.1016/J.ENGSTRUCT.2015.04.041
Yufeng Gong, Yingxin Gao, De Xie, Jingxi Liu, Deflection and fracture of a clamped plate under lateral indentation by a sphere Ocean Engineering. ,vol. 103, pp. 21- 30 ,(2015) , 10.1016/J.OCEANENG.2015.04.075
Ming Cai Xu, C. Guedes Soares, Effect of a central dent on the ultimate strength of narrow stiffened panels under axial compression International Journal of Mechanical Sciences. ,vol. 100, pp. 68- 79 ,(2015) , 10.1016/J.IJMECSCI.2015.06.008
Malgorzata Witkowska, C. Guedes Soares, Ultimate strength of locally damaged panels Thin-walled Structures. ,vol. 97, pp. 225- 240 ,(2015) , 10.1016/J.TWS.2015.09.025
Bo Cerup Simonsen, Lars Peder Lauridsen, Energy absorption and ductile failure in metal sheets under lateral indentation by a sphere International Journal of Impact Engineering. ,vol. 24, pp. 1017- 1039 ,(2000) , 10.1016/S0734-743X(00)00024-5
Young-Woong Lee, Jeffrey C Woertz, Tomasz Wierzbicki, Fracture prediction of thin plates under hemi-spherical punch with calibration and experimental verification International Journal of Mechanical Sciences. ,vol. 46, pp. 751- 781 ,(2004) , 10.1016/J.IJMECSCI.2004.05.004
B. Liu, R. Villavicencio, C. Guedes Soares, On the failure criterion of aluminum and steel plates subjected to low-velocity impact by a spherical indenter International Journal of Mechanical Sciences. ,vol. 80, pp. 1- 15 ,(2014) , 10.1016/J.IJMECSCI.2013.12.015
W. Guggenberger, Buckling and postbuckling of imperfect cylindrical shells under external pressure Thin-Walled Structures. ,vol. 23, pp. 351- 366 ,(1995) , 10.1016/0263-8231(95)00022-6
Ge Wang, Hideomi Ohtsubo, Kikuo Arita, Large Deflection of a Rigid-Plastic Circular Plate Pressed by a Sphere Journal of Applied Mechanics. ,vol. 65, pp. 533- 535 ,(1998) , 10.1115/1.2789089
Sang-Rai Cho, Hyun-Seung Lee, None, Experimental and analytical investigations on the response of stiffened plates subjected to lateral collisions Marine Structures. ,vol. 22, pp. 84- 95 ,(2009) , 10.1016/J.MARSTRUC.2008.06.003