Cutting performance of different coated twist drills
作者： Wen-Chou Chen , Chung-Chen Tsao
DOI: 10.1016/S0924-0136(98)00396-3
关键词: Narrow range 、 Flank 、 Composite material 、 Twist 、 Metallurgy 、 Drilling 、 Physical vapor deposition 、 Materials science 、 Torque 、 Thrust 、 Drill
摘要: Abstract The cutting performance of HSS twist drills with various coatings was experimentally investigated in this study. experiments were conducted to investigate and compare the force responses drill life these coated drilling JIS SS 400 carbon steels. experimental results indicate that thrust forces torque generated during process vary within a narrow range for under some conditions. However, average values trust increase feed rates all drills, whilst decrease as spindle speeds up 725 rpm, current experiments. wear widths developed on flank surface also examined, showing TiCN-surface multilayer has least rate amongst drills.
elsevier.com
sci-hub.se 参考文章(8)
E. Bergmann, H. Kaufmann, R. Schmid, J. Vogel, Ion-plated titanium carbonitride films Surface & Coatings Technology. ,vol. 42, pp. 237- 251 ,(1990) , 10.1016/0257-8972(90)90156-7
Yeong Yan Guu, Jen Fin Lin, Comparison of the tribological characteristics of titanium nitride and titanium carbonitride coating films Surface and Coatings Technology. ,vol. 85, pp. 146- 155 ,(1996) , 10.1016/0257-8972(95)02737-8
Per Hedenqvist, Mikael Olsson, Per Wallén, Åsa Kassman, Sture Hogmark, Staffan Jacobson, How TiN coatings improve the performance of high speed steel cutting tools Surface & Coatings Technology. ,vol. 41, pp. 243- 256 ,(1990) , 10.1016/0257-8972(90)90172-9
K.G. Günther, H. Freller, H.E. Hintermann, W. König, D. Kammermeier, Advanced Coatings by Vapour Phase Processes CIRP Annals. ,vol. 38, pp. 645- 655 ,(1989) , 10.1016/S0007-8506(07)61132-9
B. Navinšek, IMPROVEMENT OF CUTTING TOOLS BY TiN PVD HARD COATING Materials and Manufacturing Processes. ,vol. 7, pp. 363- 382 ,(1992) , 10.1080/10426919208947426
H.K. Tönshoff, W. Spintig, W. König, A. Neises, Machining of Holes Developments in Drilling Technology CIRP Annals. ,vol. 43, pp. 551- 561 ,(1994) , 10.1016/S0007-8506(07)60501-0
J.P Coad, P Warrington, R.B Newbery, M.H Jacobs, Titanium nitride coatings by sputter ion plating Materials & Design. ,vol. 6, pp. 190- 195 ,(1985) , 10.1016/0261-3069(85)90042-1
A. Matthews, THE ROLE OF PHYSICAL VAPOUR DEPOSITION AS A MANUFACTURING PROCESS Materials and Manufacturing Processes. ,vol. 3, pp. 91- 105 ,(1988) , 10.1080/08842588708953198