Manufacture of steel–CF/PA6 hybrids in a laser tape placement process: Effect of first-ply placement rate on thermal history and lap shear strength
作者： C.M. Stokes-Griffin , A. Kollmannsberger , S. Ehard , P. Compston , K. Drechsler
DOI: 10.1016/J.COMPOSITESA.2018.05.007
关键词: Finite element method 、 Shear (sheet metal) 、 Composite material 、 Materials science 、 Thermal 、 Thermal model 、 Laser 、 Interfacial bond 、 Composite number
摘要: Abstract This paper investigates the manufacture of selectively reinforced metal/composite hybrids in a laser-assisted automated tape placement process. Carbon-fibre/PA6 composite tapes were applied to PA6-coated steel substrates. The bonding first-ply substrate is critical success hybrid; effect rate was investigated for speeds 25 mm/s, 50 mm/s, 100 mm/s. interfacial bond strength hybrid laminates determined by ASTM D 3165 lap shear tests. A 3D finite element thermal model formulated elucidate behaviour increasing rate. method efficiency shown significantly decrease computational difficulty while maintaining solution accuracy. Raising from 25 mm/s 100 mm/s resulted fourfold increase with maximum value 22 MPa. greater at higher attributed improved synchronisation temperature and consolidation pressure history.
sci-hub.se 参考文章(51)
Patrick Kim, A Comparative Study of the Mechanical Performance and Cost of Metal, FRP, and Hybrid Beams Applied Composite Materials. ,vol. 5, pp. 175- 187 ,(1998) , 10.1023/A:1008830017745
C.M. Stokes-Griffin, P. Compston, The effect of processing temperature and placement rate on the short beam strength of carbon fibre-PEEK manufactured using a laser tape placement process Composites Part A-applied Science and Manufacturing. ,vol. 78, pp. 274- 283 ,(2015) , 10.1016/J.COMPOSITESA.2015.08.008
P.N. Parkes, R. Butler, J. Meyer, A. de Oliveira, Static strength of metal-composite joints with penetrative reinforcement Composite Structures. ,vol. 118, pp. 250- 256 ,(2014) , 10.1016/J.COMPSTRUCT.2014.07.019
J.G. Broughton, A. Beevers, A.R. Hutchinson, Carbon-fibre-reinforced plastic (CFRP) strengthening of aluminium extrusions International Journal of Adhesion and Adhesives. ,vol. 17, pp. 269- 278 ,(1997) , 10.1016/S0143-7496(97)00020-1
E. P. Beyeler, S. I. Gu¨c¸eri, Thermal Analysis of Laser-Assisted Thermoplastic-Matrix Composite Tape Consolidation Journal of Heat Transfer-transactions of The Asme. ,vol. 110, pp. 424- 430 ,(1988) , 10.1115/1.3250502
R. Schledjewski, M. Latrille, Processing of unidirectional fiber reinforced tapes—fundamentals on the way to a process simulation tool (ProSimFRT) Composites Science and Technology. ,vol. 63, pp. 2111- 2118 ,(2003) , 10.1016/S0266-3538(03)00108-8
S.M. Grove, Thermal modelling of tape laying with continuous carbon fibre-reinforced thermoplastic Composites. ,vol. 19, pp. 367- 375 ,(1988) , 10.1016/0010-4361(88)90124-3
A.B. Abibe, S.T. Amancio-Filho, J.F. dos Santos, E. Hage, Mechanical and failure behaviour of hybrid polymer–metal staked joints Materials & Design. ,vol. 46, pp. 338- 347 ,(2013) , 10.1016/J.MATDES.2012.10.043
George Marsh, Composites and metals – a marriage of convenience? Reinforced Plastics. ,vol. 58, pp. 38- 42 ,(2014) , 10.1016/S0034-3617(14)70108-0
A.J. Comer, D. Ray, W.O. Obande, D. Jones, J. Lyons, I. Rosca, R.M. O’ Higgins, M.A. McCarthy, Mechanical characterisation of carbon fibre–PEEK manufactured by laser-assisted automated-tape-placement and autoclave Composites Part A-applied Science and Manufacturing. ,vol. 69, pp. 10- 20 ,(2015) , 10.1016/J.COMPOSITESA.2014.10.003