The effects of substitution of Cr for Mo on the mechanical properties of nanocrystalline Mo5Si3 films.
作者： Jiang Xu , Yue Wang , Shuyun Jiang
DOI: 10.1039/B9NR00225A
关键词: Nanoindentation 、 Composite material 、 Materials science 、 Glow discharge 、 Elastic modulus 、 Alloy 、 Grain size 、 Nanocrystalline material
摘要: A series of nanocrystalline (MoxCr1−x)5Si3 films with an average grain size 8 nm has been prepared on Ti-6A1-4V alloy substrates by glow discharge. The effect substitution Cr for Mo the hardness, elastic modulus and plastic deformability film was investigated using nanoindentation method. results reveal that hardness slightly decreases increasing content. In contrast, significantly increases
rsc.org
harvard.edu
sci-hub.se 参考文章(35)
I. A. Ovid'ko, MATERIALS SCIENCE: Deformation of Nanostructures Science. ,vol. 295, pp. 2386- 2386 ,(2002) , 10.1126/SCIENCE.1071064
D.P. Mason, D.C. Van Aken, On the creep of directionally solidified MoSi2-Mo5Si3 eutectics Acta Metallurgica Et Materialia. ,vol. 43, pp. 1201- 1210 ,(1995) , 10.1016/0956-7151(94)00319-D
S.V. Raj, An evaluation of the properties of Cr3Si alloyed with Mo Materials Science and Engineering: A. ,vol. 201, pp. 229- 241 ,(1995) , 10.1016/0921-5093(95)09767-8
C.C. Koch, D.G. Morris, K. Lu, A. Inoue, Ductility of Nanostructured Materials Mrs Bulletin. ,vol. 24, pp. 54- 58 ,(1999) , 10.1557/S0883769400051551
C.L. Yeh, H.J. Wang, A comparative study on combustion synthesis of Ta–Si compounds Intermetallics. ,vol. 15, pp. 1277- 1284 ,(2007) , 10.1016/J.INTERMET.2007.03.004
J.H Schneibel, C.J Rawn, E.A Payzant, C.L Fu, Controlling the thermal expansion anisotropy of Mo5Si3 and Ti5Si3 silicides Intermetallics. ,vol. 12, pp. 845- 850 ,(2004) , 10.1016/J.INTERMET.2004.02.035
D. Farkas, Fracture Resistance of Nanocrystalline Ni Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 38, pp. 2168- 2173 ,(2007) , 10.1007/S11661-007-9180-Z
Erik Ström, Sten Eriksson, Håkan Rundlöf, Ji Zhang, Effect of site occupation on thermal and mechanical properties of ternary alloyed Mo5Si3 Acta Materialia. ,vol. 53, pp. 357- 365 ,(2005) , 10.1016/J.ACTAMAT.2004.09.031
A.R. Cox, R. Brown, PROTECTION OF MOLYBDENUM FROM OXIDATION BY MOLYBDENUM DISILICIDE BASED COATINGS Journal of The Less Common Metals. ,vol. 6, pp. 51- 69 ,(1964) , 10.1016/0022-5088(64)90007-4
Zhe Chen, YouWei Yan, Influence of sintering temperature on microstructures of Nb/Nb5Si3 in situ composites synthesized by spark plasma sintering Journal of Alloys and Compounds. ,vol. 413, pp. 73- 76 ,(2006) , 10.1016/J.JALLCOM.2005.06.005