Morphology and physical properties of SAN/NBR blends: The effect of AN content in NBR
作者： Sang Jun Ahn , Kwan Hee Lee , Byung Kyu Kim , Han Mo Jeong
DOI: 10.1002/1097-4628(20001209)78:11<1861::AID-APP20>3.0.CO;2-F
关键词:
摘要: Poly(styrene-co-acrylonitrile) (SAN), of which the content acrylonitrile (AN) repeating unit is 32 wt % (SAN32), was blended with poly(butadiene-co-acrylonitrile) (NBR). The effects AN in NBR on miscibility, morphology, and physical properties SAN32/NBR (70/30 by weight) blends were studied. Differential scanning calorimetry morphology observed transmission electron microscopy showed that miscibility between SAN32 increased as up to 50 %. impact strength some other mechanical had maximum value when 34 In measurement viscoelasticity at melt state, yield behavior low shear rate, this most evident
researchgate.net 
sci-hub.se 参考文章(23)
C SCOTT, Morphology development during the initial stages of polymer-polymer blending Polymer. ,vol. 36, pp. 461- 470 ,(1995) , 10.1016/0032-3861(95)91554-K
Chang Dae Han, Heng-Huey Yang, Rheological behavior of blends of poly(methyl methacrylate) (PMMA) and poly(acrylonitrile‐stat‐styrene)‐graft‐polybutadiene (ABS) Journal of Applied Polymer Science. ,vol. 33, pp. 1221- 1229 ,(1987) , 10.1002/APP.1987.070330413
Marie-Pierre Bertin, Gérard Marin, Jean-Pierre Montfort, Viscoelastic properties of acrylonitrile‐butadiene‐styrene (ABS) polymers in the molten state Polymer Engineering and Science. ,vol. 35, pp. 1394- 1406 ,(1995) , 10.1002/PEN.760351711
Xiaoming Jin, Wei Li, CORRELATION OF MECHANICAL-PROPERTIES WITH MORPHOLOGY, RHEOLOGY, AND PROCESSING PARAMETERS FOR THERMOTROPIC LIQUID-CRYSTALLINE POLYMER-CONTAINING BLENDS Journal of Macromolecular Science, Part C: Polymer Reviews. ,vol. 35, pp. 1- 13 ,(1995) , 10.1080/15321799508014587
A. De Loor, P. Cassagnau, A. Michel, B. Vergnes, Development and control of a blend morphology by In situ cross‐linking of the dispersed phase Journal of Applied Polymer Science. ,vol. 53, pp. 1675- 1686 ,(1994) , 10.1002/APP.1994.070531214
L. A. Utracki, Viscoelastic behavior of polymer blends Polymer Engineering and Science. ,vol. 28, pp. 1401- 1404 ,(1988) , 10.1002/PEN.760282109
JMG Cowie, John H Harris, Iain J McEwen, None, Blends of poly(styrene-stat-acrylonitrile) and poly(butadiene-stat-acrylonitrile) : a guide to the butadiene-acrylonitrile segmental interaction Macromolecules. ,vol. 25, pp. 5287- 5290 ,(1992) , 10.1021/MA00046A028
Toshiaki Ougizawa, Takashi Inoue, UCST and LCST Behavior in Polymer Blends and Its Thermodynamic Interpretation Polymer Journal. ,vol. 18, pp. 521- 527 ,(1986) , 10.1295/POLYMJ.18.521
Yuji Aoki, Kenjiro Nakayama, Dynamic Viscoelastic Properties of ABS Polymers in the Molten State IV. Effect of Rubber Particle Size Polymer Journal. ,vol. 14, pp. 951- 958 ,(1982) , 10.1295/POLYMJ.14.951
Chi-Kai Shih, Mixing and morphological transformations in the compounding process for polymer blends: The phase inversion mechanism† Polymer Engineering and Science. ,vol. 35, pp. 1688- 1694 ,(1995) , 10.1002/PEN.760352105