Cooling Performance of Using a Confined Slot Jet Impinging onto Heated Heat Sinks
作者： Ta-Wei Lin , Ming-Chang Wu , Li-Kang Liu , Chun-Jen Fang , Ying-Huei Hung
DOI: 10.1115/1.2161426
关键词:
摘要: A series of experimental investigations on the studies related to transient- and steady-state cooling performance from horizontally heated heat sinks with a confined slot jet impingement have been conducted. The relevant parameters influencing transient convective include Grashof number, ratio separation distance nozzle width, sink height Reynolds number. transfer behaviors such as temperature distribution, local average Nusselt numbers systematically explored. Two empirical correlations are presented. Furthermore, complete composite correlation number for mixed convection due buoyancy is proposed. This obtained by data regression in good agreement data. maximum errors 7.46% 2.87%, respectively.
asme.org
sci-hub.se 参考文章(12)
Gordon N Ellison, Thermal computations for electronic equipment ,(1984)
Y.H. Hung, W.M. Shiau, An effective model for measuring transient natural convective heat flux in vertical parallel plates with a rectangular rib International Journal of Heat and Mass Transfer. ,vol. 32, pp. 863- 871 ,(1989) , 10.1016/0017-9310(89)90235-4
A.M. Kiper, Impinging water jet cooling of VLSI circuits International Communications in Heat and Mass Transfer. ,vol. 11, pp. 517- 526 ,(1984) , 10.1016/0735-1933(84)90003-4
L. K. Liu, T. W. Lin, M. C. Wu, C. H. Peng, Y. H. Hung, Natural Convective Heat Transfer From an Unconfined or a Confined Heated Surface ASME 2005 Summer Heat Transfer Conference collocated with the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems. pp. 591- 598 ,(2005) , 10.1115/HT2005-72157
V. Narayanan, J. Seyed-Yagoobi, R.H. Page, An experimental study of fluid mechanics and heat transfer in an impinging slot jet flow International Journal of Heat and Mass Transfer. ,vol. 47, pp. 1827- 1845 ,(2004) , 10.1016/J.IJHEATMASSTRANSFER.2003.10.029
L. K. Liu, C. J. Fang, M. C. Wu, C. H. Peng, Y. H. Hung, Convective Heat Transfer From Confined Heated Surfaces With Slot Jet Impingement Advances in Electronic Packaging, Parts A, B, and C. pp. 161- 168 ,(2005) , 10.1115/IPACK2005-73120
H.H. Lin, Y.H. Hung, Transient forced convection heat transfer in a vertical rib-heated channel using a turbulence promoter International Journal of Heat and Mass Transfer. ,vol. 36, pp. 1553- 1571 ,(1993) , 10.1016/S0017-9310(05)80065-1
Robert J. Moffat, Describing the Uncertainties in Experimental Results Experimental Thermal and Fluid Science. ,vol. 1, pp. 3- 17 ,(1988) , 10.1016/0894-1777(88)90043-X
Y.H. Hung, S.W. Perng, An experimental technique for measuringtransient natural/forced convective heatfluxes in a vertical channel Experimental Thermal and Fluid Science. ,vol. 1, pp. 305- 313 ,(1988) , 10.1016/0894-1777(88)90011-8
D. C. Wadsworth, I. Mudawar, Cooling of a Multichip Electronic Module by Means of Confined Two-Dimensional Jets of Dielectric Liquid Journal of Heat Transfer-transactions of The Asme. ,vol. 112, pp. 891- 898 ,(1990) , 10.1115/1.2910496