The wear resistance of diamond-like carbon coated and uncoated Co28Cr6Mo knee prostheses
作者： Annett Dorner-Reisel , Christian Schürer , Eberhard Müller
DOI: 10.1016/J.DIAMOND.2003.11.080
关键词:
摘要: Diamond-like carbon (DLC) coatings were deposited on medical grade Co28Cr6Mo femoral segments for knee joint prostheses by plasma decomposition of the gaseous hydrocarbon methane. In dependence DLC-coating thickness (0.8, 2.7 and 4.5 μm), wear polymeric UHMW-PE (UHMW-PE: ultra high molecular weight polyethylene) counter face was increasing. comparison with an uncoated femur, surface modification 0.8 μm thick DLCs resulted in improved resistance. A DLC coating led to a strong decrease resistance face. possible reason this phenomenon may be changes heat transfer. The transfer reduced due lower fraction defects, like pinholes, thicker coatings. Starting from certain temperature level at inlays, structural could expected, causing higher materials loss. Furthermore, components, release metallic products is coverage alloy DLCs. Hereby, biocompatibility expected.
harvard.edu
elsevier.com
sci-hub.se 参考文章(13)
Joshua J. Jacobs, Anastasia K. Skipor, Peter F. Doorn, Pat Campbell, Thomas P. Schmalzried, Jonathan Black, Harlan C. Amstutz, Cobalt and Chromium Concentrations in Patients With Metal on Metal Total Hip Replacements Clinical Orthopaedics and Related Research. ,vol. 329, ,(1996) , 10.1097/00003086-199608001-00022
Thomas P. Schmalzried, Murali Jasty, Andrew Rosenberg, William H. Harris, Polyethylene wear debris and tissue reactions in knee as compared to hip replacement prostheses. Journal of Applied Biomaterials. ,vol. 5, pp. 185- 190 ,(1994) , 10.1002/JAB.770050302
David W. Hahn, Debra L. Wolfarth, Nancy L. Parks, Characterization of submicron polyethylene wear debris from synovial-fluid samples of revised knee replacements using a light-scattering technique. Journal of Biomedical Materials Research. ,vol. 31, pp. 355- 363 ,(1996) , 10.1002/(SICI)1097-4636(199607)31:3<355::AID-JBM9>3.0.CO;2-L
S Schmitt, Tem analysis of microstructural morphology in ultra high molecular weight polyethylene Scripta Materialia. ,vol. 43, pp. 523- 528 ,(2000) , 10.1016/S1359-6462(00)00461-9
Kirsten Peters, Harald Schmidt, Ronald E. Unger, Mike Otto, Günter Kamp, C.James Kirkpatrick, Software-supported image quantification of angiogenesis in an in vitro culture system: application to studies of biocompatibility. Biomaterials. ,vol. 23, pp. 3413- 3419 ,(2002) , 10.1016/S0142-9612(02)00042-X
A Dorner, C Schürer, G Reisel, G Irmer, O Seidel, E Müller, Diamond-like carbon-coated Ti6Al4V: influence of the coating thickness on the structure and the abrasive wear resistance Wear. ,vol. 249, pp. 489- 497 ,(2001) , 10.1016/S0043-1648(01)00587-7
Annett Dorner-Reisel, Christian Schürer, Guido Reisel, Frank Simon, Gert Irmer, Eberhard Müller, CaO-modified diamond-like carbon coatings synthesised by a direct current discharge Thin Solid Films. ,vol. 398, pp. 180- 186 ,(2001) , 10.1016/S0040-6090(01)01391-8
Annett Dorner-Reisel, Christian Schürer, Volker Klemm, Gert Irmer, Eberhard Müller, Nano- and microstructure of diamond-like carbon films modified by Ca-O incorporation Diamond and Related Materials. ,vol. 12, pp. 1030- 1033 ,(2003) , 10.1016/S0925-9635(02)00293-5
L Costa, P Bracco, E Brach del Prever, M.P Luda, L Trossarelli, Analysis of products diffused into UHMWPE prosthetic components in vivo. Biomaterials. ,vol. 22, pp. 307- 315 ,(2001) , 10.1016/S0142-9612(00)00182-4
B. Saad, S. Matter, G. Ciardelli, P. Neuenschwander, U. W. Suter, G. K. Uhlschmid, M. Welti, Interactions of osteoblasts and macrophages with biodegradable and highly porous polyesterurethane foam and its degradation products Journal of Biomedical Materials Research. ,vol. 32, pp. 355- 366 ,(1996) , 10.1002/(SICI)1097-4636(199611)32:3<355::AID-JBM8>3.0.CO;2-R