Numerical modelling of kerf geometry in abrasive water jet machining
作者： Ambuj Saxena , S. Paul
关键词:
摘要: Abrasive Water Jet (AWJ) machining is gaining acceptance and popularity under actual shop floor conditions as a mature technology. This requires thorough experimental numerical research to utilise the full potential of work proposes modelling technique study effect different process parameters on kerf characteristics. The implemented model not only captures individual characteristics like depth penetration, shape surface roughness, but also most importantly matches trend between two processed features namely Taper quality parameter Cutting ability parameter.
sci-hub.se 参考文章(13)
Radovan Kovacevic, Andreas W. Momber, Principles of Abrasive Water Jet Machining ,(2012)
G. Vikram, N. Ramesh Babu, Modelling and analysis of abrasive water jet cut surface topography International Journal of Machine Tools & Manufacture. ,vol. 42, pp. 1345- 1354 ,(2002) , 10.1016/S0890-6955(02)00064-0
J.G.A. Bitter, A study of erosion phenomena part I Wear. ,vol. 6, pp. 5- 21 ,(1963) , 10.1016/0043-1648(63)90003-6
L. Chen, E. Siores, W.C.K. Wong, Kerf characteristics in abrasive waterjet cutting of ceramic materials International Journal of Machine Tools & Manufacture. ,vol. 36, pp. 1201- 1206 ,(1996) , 10.1016/0890-6955(95)00108-5
C. Ma, R.T. Deam, A correlation for predicting the kerf profile from abrasive water jet cutting Experimental Thermal and Fluid Science. ,vol. 30, pp. 337- 343 ,(2006) , 10.1016/J.EXPTHERMFLUSCI.2005.08.003
Andrej Lebar, Mihael Junkar, Simulation of abrasive water jet cutting process: Part 1. Unit event approach Modelling and Simulation in Materials Science and Engineering. ,vol. 12, pp. 1159- 1170 ,(2004) , 10.1088/0965-0393/12/6/010
Henri Orbanic, Mihael Junkar, Simulation of abrasive water jet cutting process: Part 2. Cellular automata approach Modelling and Simulation in Materials Science and Engineering. ,vol. 12, pp. 1171- 1184 ,(2004) , 10.1088/0965-0393/12/6/011
S Paul, A M Hoogstrate, R van Praag, Abrasive water jet machining of glass fibre metal laminates Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ,vol. 216, pp. 1459- 1469 ,(2002) , 10.1243/095440502320783396
Mohamed Hashish, A Modeling Study of Metal Cutting With Abrasive Waterjets Journal of Engineering Materials and Technology-transactions of The Asme. ,vol. 106, pp. 88- 100 ,(1984) , 10.1115/1.3225682
Jiyue Zeng, Thomas J Kim, An erosion model of polycrystalline ceramics in abrasive waterjet cutting Wear. ,vol. 193, pp. 207- 217 ,(1996) , 10.1016/0043-1648(95)06721-3